USER GUIDE Supertooth II Independent Hands free Kit with DSP for Bluetooth Cell phones
OVERVIEW The SuperTooth is equipped with Bluetooth and Digital Signal Processor that allow wireless communications on devices such as cellular phones. This is designed to be a totally portable wireless handsfree kit which will enable the user to communicate freely without holding the phone. This will work on any Bluetooth cellular phones available provided that they respect the Bluetooth protocol.
A. TURNING ON/OFF THE SUPERTOOTH 1. 2. B. To turn the SuperTooth ON, just flip up the swivel arm [7] at 55º position. The Bluetooth indicator will glow (blue blink). This indicates that the kit is ready (standby mode). Note: At first time use, the user has to pair the SuperTooth with his phone (see Section C). To turn the SuperTooth OFF, just flip down the swivel arm @ 0º position. The Bluetooth Indicator will become red then will turn off after a second.
3. 4. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. Press Pick-Up/Hang-Up Button[9] to terminate the call. Redialing (Handsfree profile only) Make a long press on the Pick-Up/Hang-Up Button[9]. Audio will be heard on the SuperTooth. F. AUDIO TRANSFER Audio transfer can be done by flipping up or down the Swivel Arm[7]. G.