OPERATI NG MANUAL Supe r Toot h I nde pe nde nt H a ndsfr e e Kit w it h Blue t oot h a nd D SP
OVERVI EW The Supertooth is equipped with Bluetooth and Digital Signal Processor that allows wireless communications on devices such as cellular phones. This is designed to be a totally portable wireless handsfree kit. This also provides convenience to the user by communicating with the hands free. Supertooth will work on any Bluetooth cellular phones available provided that they respect the Bluetooth protocol.
B. TURN I N G ON / OFF TH E SUPERTOOTH 1. 2. 3. C. To turn the Supertooth ON, slide the switch to the right. The Bluetooth indicator will light blue. The kit is now ready and is waiting for a call (standby mode). (Note: If the charge indicator becomes blinking red, it means that the battery on the kit is low. Re-charge it immediately with the supplied charger. Refer to Section D for the charging operations.) To turn the Supertooth OFF, slide the switch to the left.
SUPERTOOTH OPERATIONS FOR POPULAR CELL PHONES Note 1: If your phone is not included on the following list of this manual, kindly refer to the manual of your phone. Note 2: Softwares and menus could be modified by the cell phone’s manufacturers without prior notice. If the manual does not match with your cell phone operations, kindly refer to the manual of your cell phone. Note 3: Multi-pairing is now possible. Sony Ericsson T68/T68i a. Activating the Bluetooth b. Pairing to the Cellular Phone c.
Sony Ericsson Z600 a. Activating the Bluetooth b. Setting to Low Power Mode c. Pairing to the Cellular Phone d. Answering/Receiving a Call e. Making a Call with the Supertooth on f. Audio Transfer g. Setting the Volume h. Activating the Voice Dialing i. Recording for Voice Dialing ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… 13 13 14 14 14 14 14 14 15 Nokia 6310/6310i a. Activating the Bluetooth b.
Nokia 6600 a. Activating the Bluetooth b. Pairing to the Cellular Phone c. Auto Accept Mode d. Answering/Receiving a Call e. Making a Call with the Supertooth on f. Audio Transfer g. Rejecting a Call h. Setting the Volume i. Recording for Voice Dialing ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… ………………………………………… 24 24 24 24 24 25 25 25 25 Siemens S55 a. Activating the Bluetooth b. Pairing to the Cellular Phone c.
USING WITH SONY ERICSSON T68/T68i a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Go the Menu Key by pressing the joystick. Scroll to Connect, YES. Select Bluetooth, YES. Select Options, YES. Operation mode, YES. On, YES. 2. Continue pressing NO, to exit. QUICK ACCESS: Press Menu followed by the sequence of numbers below. Connect Bluetooth Options T68 8 3 T68i 8 4 (or 3 for T68i R7) 4 b.
3. 4. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. Press the hang-up button to terminate the call. Redialing For T68i R6 and R7, make a long press on the answer button once. Call is automatically transferred on the Supertooth. e. AUDIO TRANSFER Audio Transfer can be done by pressing the answer button or accessing the cell phone’s menu during ongoing calls.
T68i Settings 5 Voice control 6 Voice dialing 1 Edit names 2 Note: Record your voice command in a quiet place so that only your voice will be recorded on the phone. USING WITH SONY ERICSSON T39m a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press the Menu Key. Scroll to Extras and press YES. Select Operation mode, YES. On, YES. 2. Continue pressing NO, to exit.
2. 3. 4. A beep will then be heard on the Supertooth prompting the user to say the name of the person to call. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. Press the hang-up button to terminate the call. e. AUDIO TRANSFER Audio Transfer can be done by pressing the answer button or accessing the cell phone’s menu during ongoing calls. f.
6. 7. 8. Tap the device you want to pair with. Bonding in progress will be displayed on screen. The phone will then ask for the pass key. Tap on the lower left corner of the screen. Enter “0000” as the passkey and tap Done. Tap Done under the sub-title, “Secure Connection.” If the pairing is successful, the alternating red/blue lights will stop. Tap to exit and return to the Applications mode. If the pairing is unsuccessful, the steps above may be repeated. The Supertooth is paired and ready to use.
5. Tap to make another record and repeat the steps above. To return to the Applications window, tap . Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment. USING WITH SONY ERICSSON T610 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Go the Menu Key by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT. Turn On, SELECT. 2.
g. SETTING THE VOLUME Setting the volume can be done using the volume control. 1. Turn it clockwise to increase the volume. 2. Decrease the volume by turning it counter-clockwise. If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones. h. ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice.
e. MAKING A CALL with the Supertooth on Normal dialing 1. Enter the contact number and press CALL button. Audio is automatically transferred to the Supertooth. 2. Press the hang-up button to hang-up and terminate the call. Voice dialing Refer to step h and i for the procedure when activating and recording for voice dialing. 1. Press the answer button once to activate the voice dialing. 2. A beep will then be heard on the Supertooth prompting the user to say the name of the person to call. 3. Say the name.
3. 4. c. Choose Ppwer Save, SELECT. Continue pressing , to exit. PAIRING TO THE CELLULAR PHONE (Not possible during charging) 1. Bring the cellular phone at about 20 cm from the Supertooth. 2. Turn off the Supertooth and wait for about 4 seconds. 3. Turn ON the Supertooth while pressing the answer button for 10 seconds or until a distinctive tone will be heard and at the same time the red and blue indicator will alternately blink. This indicates that the unit is now ready for pairing. 4.
3. 4. Follow the instructions in the display. An icon will appear opposite a contact’s name which has a voice command. Continue pressing to exit. Note: Record your voice command in a quiet place so that only your voice will be recorded on the phone. USING WITH NOKIA 6310/6310i a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press the Menu button. Scroll to Bluetooth, SELECT. Press SELECT again. 2.
d. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Supertooth as well as on the phone. 1. Press the answer button down once to answer the call. 2. End the call by pressing the hang-up button. Note: Cell phone buttons can also be used to answer a call but audio is still transferred to the Supertooth. e. MAKING A CALL with the Supertooth on Normal dialing 1. Enter the contact number and send.
USING WITH NOKIA 8910 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu. Scroll to Bluetooth, SELECT. Press SELECT again. 2. Choose On, SELECT. An icon will appear on the upper left corner. 3. Press Back then Exit to exit the Menu. QUICK ACCESS: Press Menu followed by the sequence of numbers below. Blue tooth Select 8910 10 1 b.
e. MAKING A CALL with the Supertooth on Normal dialing 1. Enter the contact number and send. As you dial, audio and the keypad tones can be heard on the Supertooth simultaneously but not on the phone. 2. Press the hang-up button to hang-up and terminate the call. Note: If the call is terminated using the cellular phone, no tone will be heard on the Supertooth indicating that the call has been terminated. Voice dialing Refer to step i for the procedure when recording for voice dialing. 1.
QUICK ACCESS: Press Menu followed by the sequence of numbers below. Connectivity Blue tooth Select 8910i 10 1 1 b. On 1 Select 1 PAIRING TO THE CELLULAR PHONE (Not possible during charging) 1. Bring the cellular phone at about 20 cm from the Supertooth. 2. Turn off the Supertooth and wait for about 4 seconds. 3. Turn ON the Supertooth while pressing the answer button for 10 seconds or until a distinctive tone will be heard at the same time the red and blue indicator will alternately blink.
2. 3. 4. A beep will then be heard on the Supertooth prompting the user to say the name of the person to call. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps above may be repeated. Press the hang-up button to terminate the call. Redialing Make a long press on the answer button once to redial the last number. f.
6. Continue pressing Exit key to exit the Menu. The Supertooth is paired and ready to use. An icon will be displayed during the standby mode indicating that the Supertooth is linked with the phone. Note: Once paired, press the answer button once to establish simultaneous connection between the Supertooth and the phone (keypad tones can be heard on the Supertooth every time the keypad is pressed).
i. RECORDING FOR VOICE DIALING Use your phone when recording voice dialing. 1. Press the Menu button. Select Contacts, OPTIONS. Open, SELECT. 2. Find a contact name. Press button. (The contact number is the one being displayed.) 3. Press Options button. Scroll to Add Voice tag, SELECT. Instructions appear. Your voice is automatically saved on the phone after being played back to you. 4. In case you wish to change your recorded voice, press Options button. Voice tag, SELECT. Change, SELECT.
QUICK ACCESS: Press Menu followed by the sequence of numbers below. Connectivity Bluetooth 6650 11 1 d. View paired devices 4 ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Supertooth as well as on the phone. 1. Press the answer button down once to answer the call. 2. End the call by pressing the hang-up button. Note: Cell phone buttons can also be used to answer a call but audio is still transferred to the Supertooth. e.
USING WITH NOKIA 6600 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press the Menu key. Using the joystick, scroll to Connect., press to select . A list of options will be displayed. Choose Bluetooth, press to select. 2. Bluetooth OFF will be displayed. Press to switch Bluetooth On. 3. Continue pressing Exit key to exit the Menu. b. PAIRING TO THE CELLULAR PHONE 1.
2. 3. 4. A beep will then be heard on the Supertooth prompting the user to say the name of the person to call. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps above may be repeated. Press the button again to terminate the call. Redialing Make a long press on the answer button to redial the last number. f.
4. 6. 7. Press the Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT. Scroll to Bluetooth, OPTIONS. Scroll to Search for…, press ACCESS button. The phone is now searching for devices. When the search is complete, Devices disc. is displayed as title. If the device you are looking for is not on the list, repeat the procedure by pressing the OPTIONS and REPEAT buttons. Then press SELECT to add the device. The phone will initiate connection with the Supertooth. Pls, enter BT pin for…, OK.
3. 4. 5. Scroll to Voice dialing, SELECT. New, SELECT. Recording for: contact name, YES. Follow the instructions. Your voice is automatically saved on the phone after being played back to you. In case you wish to change your recorded voice, press Options button. Voice tags, SELECT. Change, SELECT. Instructions appear. Press On/Off/End key to exit Note: Noisy environment may affect voice recognition. Record your voice in a quiet place. FCC Notices This device complies with part 15 of the FCC rules.
