Bluetooth Handsfree Kit For Bluetooth Mobile Phones
Product Description SUPERTOOTH LIGHT is a Bluetooth handsfree kit that supports headset or handsfree profile phones. Its special features include Full DSP Noise Cancellation/Echo Cancellation, thus, it provides an advanced audio quality. It is designed for easy handsfree operation and superior performance. Don't forget: Drive safely and within the law. Check if the national or local legislation into force in your country does limit the use of mobile phones while driving.
Charging When the Bluetooth Indicator (3) turns red, the battery of the kit is low. Charge the unit. 1. Connect the charger’s plug into the Charger Port (9) of the SUPERTOOTH LIGHT. Connect the charger to an external power source. Charge Indicator (4) Status: Steady red: Charging Steady green: Full Charge 2. When fully charged, disconnect the charger. Power On/Off Power On: Press-and-release the Microphone Shaft (5). Power Off: Push the Microphone Shaft (5) in.
. While the kit is in pairing mode, access the Bluetooth menu of your phone. Turn on the Bluetooth function then execute a Bluetooth search, or discover. (See your phone’s manual.) 5. When the phone displays the list of Bluetooth devices, select ST LIGHT. 6. When the phone asks for the password, enter 0000 and press Ok. Important Note: The kit is paired now. Most phones automatically connect to the kit after pairing. With some phones you need to connect manually after pairing.
Answer a Call: During the ring tone, press Accept Button (1) for 1 second to answer the call. End a Call: Press End/Reject Button (2) for 1 second to end the call. Voice Dial: Important: Be sure the voice dialing function of your phone is activated. Record at least one voice tag. (Kindly refer to the procedure in your phone’s manual.) Important: Voice dialing entries must be stored in the phone’s memory, not on the SIM card! 1. Press the Accept Button (1) for 1 second. 2.
Buttons Mapping Buttons Kit Status Accept Button / (Short press/ 1 second) Connected / On and Standby Initiates Voice dial On and Standby but Disconnected Creates reconnection/ initiates voice dial Incoming call (ring being generated) Answers the call Active call on ST LIGHT Active call on Phone Accept Button / (Long press / 2 seconds) End / Reject Button (Short press) Redials last dialed number Rejects the call Transfers audio to phone Ends the call Transfers audio to kit Outgoing call bei
SUPERTOOTH LIGHT Specifications Bluetooth Compliance: Bluetooth version 1.2 specifications Supported Bluetooth Profiles: Supports headset and handsfree profiles with automatic detection Operating Range: Up to 10 meters Frequency: 2.
English Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.