F2S Bluetooth Headset for Motorcycle Features VOX Technology Intercom Technology Multi-Point Connection Auto-Volume Level Adjusting
A. BTMOTOF2S PACKAGE: BTMOTOF2S Headset Headset Clip w/ double-sidedAdhesive Sticker Headset Clip w/ Fastening Screws Travel Charger Spacer for Headset Clip Screw Driver Velcro Pad B. PRODUCT DESCRIPTION: BTMOTOF2S is a Bluetooth Headset designed for motorcycle rider or passenger who wishes to have reliable hands-free, wireless and clear communications while driving.
D. POWER ON OR OFF: Power On: Press the MFB (1) until Status Indicator (5) turns blue. Or press for approximately 3 seconds, a beep will be heard. Power Off: Press the MFB (1) until Status Indicator (5) turns red. Or press for approximately 5 seconds until 3rd tone will be heard. E. PAIRING TO YOUR BLUETOOTH MOBILE PHONE: 1. From OFF, press and hold the MFB (1) of the BTMOTOF2S until the Status Indicator (5) turns blinking red/blue. 2.
2. Using the Headset Clip with double-sided-Adhesive Sticker Take the Headset Clip with double-sided- Adhesive Sticker and remove the film covering the other side. Find the best location and stick the clip to the outer shell of the helmet. b) Mounting the BTMOTOF2S 1. Take your BTMOTOF2S and slide it down into the slots in the Headset Clip. Make sure that it’s perfectly fitted and locked into place. 2. Stick the Velcro pad to the helmet’s left and right ear pocket. Attach the L/R Ear Speaker(6) to it.
H. BASIC OPERATION: Main MFB Functions: Short Press MFB (1): Phone Related Commands Long Press MFB (1): Intercom Related Commands IMPORTANT: The BTMOTOF2S needs to be ‘paired’ with your Bluetooth mobile phone before you can use the following functions. (See Pairing to your Bluetooth Mobile Phone on section E.) To Make a Call: Dial the number using your phone. Audio will automatically be on the headset.
I. ADVANCED FUNCTIONS: a. VOX - Activation / Deactivation: When activated, the user can accept a call by saying any word within 10 seconds. The user can also reject a call by being silent for 10 seconds. When deactivated, use the MFB (1) to answer a call. The Voice Answer Mode can be enable or disable when the kit is in standby mode (no ongoing call and no intercom communication). Activation: From Connected or standby, press and hold the Volume Up (3) button until 3rd tone. Then release.
c. MULTI-POINT FUNCTION: The BTMOTOF2S can simultaneously connect as Handsfree for phone for calls and Intercom. The BTMOTOF2Sis active on both Handsfree and Intercom and will automatically connect to the selected one after the key press actions. Key Press Actions: Short Press MFB (1): Phone Connect Long Press MFB (1): Intercom Connect Using MULTI-POINT: Refer to “Using INTERCOM” on section I, “Phone BASIC OPERATION on section H.
J. BTMOTOF2S SPECIFICATIONS: Bluetooth Compliance: Bluetooth Version 2.0 Operating Range: Up to 10 meters Frequency: 2.
English Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.