Bluetooth Handsfree Kit Car Speakerphone (For Bluetooth Mobile Phones)
Table of Contents 1. Product Overview………………………………………….……………………... 2 2. Charging………………………………………………………………………….... 2 3. Power On/Off…………………………………………………………………….... 2 Power On Power Off 4. Pairing to your Bluetooth Mobile Phone…………………………………….... 3 5. Basic Operations………………………………………………………………..… 4 Answer Calls End Calls Redial Last Number Voice Dial Reject Calls To adjust the Volume Setting To transfer Audio from the Handsfree kit to the Phone To Transfer Audio from the Phone to the Handsfree kit 6.
1. Product Overview 1 End/Reject Button(end call & reject call) 2 Power Button(Power On/Off) 3 MFB or Multi-function Button & Volume Control (answer call / voice dial / redial & audio transfer) 4 5 6 7 8 Microphone Charger Port Charge Indicator Bluetooth Indicator Speaker 2. Charging Your SUPERTOOTH HD will be needed to charge if Charge Indicator (6) turns red. 1. Connect the charger’s plug into the Charger Port (5) of the SUPERTOOTH HD. Connect the charger to an external power source.
Power Off: Press the Power (2) button for 1 second. Turn Off beep will be heard and a voice will say, “SUPERTOOTH HD Powering down.” The Bluetooth Indicator (7) will turn steady red and then turns off. 4. Pairing to your Bluetooth Mobile Phone SUPERTOOTH HD needs to pair to your Bluetooth mobile phone to create the link or audio connection between the two. Pairing should be done only at the first connection to the phone. Pairing Procedure: 1.
. Basic Operations IMPORTANT: The kit needs to be ‘paired’ to your Bluetooth mobile phone first, before you can use the following functions. See Pairing to your Bluetooth Mobile Phone in Section 4. Answer Calls: During the ring tone, press the MFB (3) button to answer the call and when call is answered, the Bluetooth Indicator (7) will turn blinking blue. End Calls: Press the End/Reject (1) button for 1 second to end the call.
To transfer Audio from the Handsfree kit to the Phone: Press and hold the End/Reject (1) button for 3 seconds or simply turn off the handsfree kit by pressing the Power (2) button for 1 second. The audio will automatically be transferred to the phone. To Transfer Audio from the Phone to the Handsfree kit: Press and hold the MFB (3) button for 3 seconds and the audio will automatically be transferred to the handsfree kit.
To end the current call and accept the second incoming call: Short press the MFB (3) button will end the current call and accept the second call. The audio for the second call will automatically be heard through the handsfree kit. To place current call on-hold and accept the second incoming call: Double short press the MFB (3) button will hold the current call and answer the second call. The audio for the second call will automatically be heard through the handsfree kit.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
