Supertooth Blaster Multimedia Speaker For Bluetooth Mobile Phones, PDAs and Bluetooth-enabled PCs/Laptop Also for iPods, MP3 players and other audio sources
A. Product Description SUPERTOOTH BLASTER is a Bluetooth multimedia speaker which can be connected wirelessly to a Bluetooth mobile phone, a PDA or to a Bluetoothenabled computer. Once connected, you can stream stereo music from your phone or from your PC/Laptop to the SUPERTOOTH BLASTER. The SUPERTOOTH BLASTER can also be connected to devices used to play music that require a cable or a wire. Plug in your iPod or MP3 music player to the stereo line input at the rear side of the SUPERTOOTH BLASTER.
C. Charging When battery is low, the Bluetooth Indicator (7) will flash red twice and “Low battery” will be announced over the SUPERTOOTH BLASTER. At this point, you need to charge the SUPERTOOTH BLASTER. 1. Connect the charger’s plug into the Charger Port (9) of the SUPERTOOTH BLASTER. Connect the charger to an external power source. 2. The Charge Indicator (10) will turn steady orange while charging.
The SUPERTOOTH BLASTER is now ready to use with your phone. Pairing to a Bluetooth-enabled PC/Laptop: Important Note: Make sure that your PC or Laptop has a Bluetooth dongle that supports A2DP and has an A2DP compatible Bluetooth Application software installed before proceeding. 1. From OFF, press and hold the On/Off/Stop Button (8) for 6 seconds until beep is heard. The Bluetooth Indicator (7) turns blinking red/blue indicating that SUPERTOOTH BLASTER is in pairing mode. 2.
While music is playing on the SUPERTOOTH BLASTER, you can still receive and answer calls from your phone. When a call gets through, music will be muted then resumes when call is ended or rejected. However, on some phones, you have to press the Play/Pause Button (2) for 1 second or transfer audio to SUPERTOOTH BLASTER manually using the options on your phone to resume music on SUPERTOOTH BLASTER.
To rewind a track at a specific point, press and hold the Backward/Rewind Button (3) and release to resume play (possible on some phones only). Volume Setting: Set the volume using the Volume Control (4). Turn it clockwise to increase the volume while turn it counter clockwise to decrease the volume. Disconnect Phone/Computer from the SUPERTOOTH BLASTER: Press and hold the On/Off/Stop Button (8) for 2 seconds until beep is heard. The Bluetooth Indicator (7) will turn blinking blue.
SUPERTOOTH BLASTER Specifications Bluetooth Compliance: Bluetooth version 2.0 specifications Supported Bluetooth Profiles: A2DP Advance Audio Distribution Profile / SBC Stereo streaming / AVRCP Audio/Video Remote Control Profile Operating Range: 10 meters Bluetooth standard Frequency: 2.4 GHZ Music Playing Time: 3 hours to 4 hours (high volume level); 10 hours (medium volume) Stand-by time: Up to 1500 hours Charging Time: 3 hours Battery Type: NI MH Power pack Audio Features: 2.
Dimensions (mm): 310 x 89 x 65 Weight: 1.14 kg English Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.