SHINE GLORY ENERPRIS DLI90TRI Operation manual via APP
1. Download APP – from Apple store -Euralux Home 2. Turn on bluetooh from smart phone Fill in required data –choice area of the phone.
1. Connect power – lamp keeping flash in warm light and cold light switching around 7 sec. slowly as initial mode 2. Turn on APP to wait the green highlight on left up corner to show finished connection ( as photo 3 to show device connect to Bluetooth . . .3. Click “+” to start searching lamp with 10Sec. around as photo 4 ( Please turn off power or re-start APP in case the waiting time over 10Sec. It happen with micro possibility ) .
1. Click the icon of device to control lighting on/off. Long press the device icon come to control face as photo 5 and photo 6 . There are two slide bar on Photo 6 . One slide bar to contorl color temperature and another side bar to control light dimming 2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.