2 4 5 7 8 3 6 9 0 Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
TABLE OF CONTENTS What's Included 01 18 Specifications Product Overview 02 18 Troubleshooting Getting Started 03 20 Important Safety Instructions Installing the Smart Lock 06 20 Notice Setting up the Smart Lock 12 23 Customer Service Basic Operations 16
WHAT'S INCLUDED PRODUCT OVERVIEW For Smart Lock Installation Front View Fingerprint LED Fingerprint Button 1 4 7 2 3 5 6 8 9 0 1 2 3 6 1 3 5 2 4 4 5 6 8 9 8 9 7 Deadbolt Exterior Assembly Spacer Interior Assembly 7 0 Touchscreen 0 Cylinder Cylinder Cover Reboot Button Mounting Plate Strike Plate Strike Reinforcer Mounting Plate Screws Micro USB Port Rear View Battery Cover Setup Button Deadbolt Screws / Strike Screws Reinforcement Screws Interior Assembly Screw
GETTING STARTED • Backset (2 '' / 60 mm or 2¾'' / 70 mm) • Diameter of the door hole (1'' / 25 mm) Download eufy Security App • Door thickness (1 '' / 35 mm - 2 '' / 55 mm) Download the eufy Security App from the App Store (iOS devices running version 10.2 and later versions) or Google Play (Android devices running version 5.0 and later versions). Backset 2⅜" / 60 mm or 2¾" / 70 mm 2⅛" 54mm or 1½" 38mm Sign up for a eufy Security account, and add the Smart Lock to the device list.
INSTALLING THE SMART LOCK Step 1: Install the Deadbolt To install the deadbolt: 1. Measure your door’s backset dimension: whether it is 2¾'' / 70 mm or 2 '' / 60 mm. 2. If your door’s backset dimension is 2 '' / 60 mm, use the provided deadbolt to install. If your door’s backset is 2¾'' / 70 mm, turn the faceplate 180° and pull to extend simultaneously until the deadbolt locks in position as the illustration shows below.
Step 3: Install the Exterior Assembly To install the exterior assembly into the doorframe: 1. Measure your cross bore dimension and determine the installation steps accordingly. Screwdriver Reinforcement Screws • If the diameter of your cross bore is 2 '' / 54 mm, use the provided spacer to assist in installing the exterior assembly. • If you have a 1½'' / 38 mm crossbore, remove the spacer. 1 2. Route the cable connected on the exterior assembly under the deadbolt.
Step 4: Install the Mounting Plate Step 5: Install the Interior Assembly 1. Route the cable through the mounting plate. To install the Interior Assembly: 2. Fix the mounting plate into the interior doorframe using the mounting plate screws. Make sure the screws go through the holes of the deadbolt and the mounting plate, and lock into place. 1. Remove the battery cover. • Option A: If the mounting plate fits perfectly with the door, go to Step 5.
SETTING UP THE SMART LOCK Pair Your Phone with Smart Lock Note: 4 5 6 Step 6: Install Batteries Insert four AA batteries into the battery compartment matching the polarity (+/-) indicated. The lock will not lock automatically before the setting is completed. To avoid being locked outside, pair your phone with the Smart Lock and set an access code for unlocking the door. To pair your phone with Smart Lock: 1. Scan the QR code on the back of the Smart Lock to get Bluetooth information of the Smart Lock.
• Successfully calibrated: The button LED turns white for 2 seconds and then off. The voice prompt “calibration complete” is heard. Register Your Fingerprint • Fail to calibrate: The button and status LED turn solid red for 2 seconds and then off. The voice prompt “The deadbolt is stuck. Please return to the installation, and try again.” is heard. After setting an access code, the eufy Security app will prompt you to input your fingerprint. The fingerprint light will breathe white.
Other Settings The Smart Lock supports many features that you can configure using the eufy Security app. The features are listed as follows: • Add up to 100 users • Set language: English • Synchronize time for lock with the time on your phone • Customize voice volume for the Smart Lock • Customize the time duration for automatic door-locking. You can set the countdown duration within 3 minutes.
Lock the Door There are several options to lock the door. Option 1: Use the fingerprint scanner 1. Scan your fingerprint and wait until the fingerprint breathing light breathes blue once. The door will be locked within 1 second. 2. If not, the light will breathe red once. Repeat the steps to lock. 3. If you fail to lock the door after 5 attempts using the fingerprint scanner, the Smart Lock will reamin unlocked. Use the access code instead to lock the door.
IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 8 9 7 DO NOT attempt to install or repair the product without authorization. • Do not use excessive force or sharp objects to press lock buttons, as this can damage the product. • Make sure the door is completely closed when going outside. The manufacturer does not assume responsibility for any harm caused by your improper closing the door. • Replace batteries when the low battery alarm is heard.
FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed / mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party.
CUSTOMER SERVICE Warranty Smart Lock: 36-Month Limited Warranty Mechanical part: 36-Month Warranty Electrical Part: 18-Month Warranty +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT) +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 Customer Support: support@eufylife.