Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
TABLE OF CONTENTS What’s in the Box 01 07 Tethering or Mounting the Smart Buoy (Optional) How the System Works 02 08 How to Monitor Water Quality Setting Up the System 03 10 Notice 05 11 Customer Service Charging the Smart Buoy WHAT’S IN THE BOX Smart Buoy Model: T8791 FCC ID: 2AOKB-T8791 Charging Cable Sensor Rope Quick Start Guide 01
HOW THE SYSTEM WORKS SETTING UP THE SYSTEM The eufy Security Smart Buoy is a smart water monitor that floats in your pool. It continuously tests your water conditions then calculates and guides you when the water needs to be balanced. Know when your pool is ready to dive into or when it requires some attention. The Smart Buoy is designed for chlorine pools and tests key indicators including Free Chlorine, pH, TDS, and Temperature.
CHARGING THE SMART BUOY Use the provided charging cable to charge the Smart Buoy. 1. Remove the waterproof cap on Smart Buoy. OF F Note: Make sure you keep the cap safe as you will need it to seal the charging port before putting the Smart Buoy into your pool. OF F ON ON O You will notice the Smart Buoy light starts to flash. F F Add Smart Buoy to the App Open the eufy Security app and scan the QR code to add the Smart Buoy device.
2. Connect the other end of the charging cable to a standard USB port of your spare universal USB charger. The Smart Buoy will flash red, indicating it’s charging. 3. Once the Smart Buoy flashes green, it’s fully charged. Note: • Make sure you seal the charging port with the waterproof cap before putting the Smart Buoy into your pool. • Dry the device properly before the next charge. TETHERING OR MOUNTING THE SMART BUOY (OPTIONAL) The ideal monitoring spot in your pool is approximately 1.
HOW TO MONITOR WATER QUALITY 1. Make sure you seal the charging port with the waterproof cap before putting the Smart Buoy into your pool. Approximately 45ft 4. The first reading after turning on the device will need some time to calibrate and calculate. The initial Free Chlorine, pH, TDS, and temperature readings will appear after 3 minutes. The overall readings will be available after a few hours when more data is collected.
NOTICE CUSTOMER SERVICE FCC Statement Anker Innovations Limited This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
