FCC ID:2AOKB-T8420 IC:23451-T8420 Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
Table of Content What's in the Box 01 Power On the Floodlight Camera Indoors 02 Get the eufy Security App and Setup the Camera 02 Mount Floodlight Camera Outdoors 04 Safety 10 Customer Service 12
What's in the Box Power On the Floodlight Camera Indoors 1. Connect Floodlight Camera to a power source, and then wait 1 minute or until the LED indicator blinks red. Floodlight Cemara Power cord Mounting Plate Installation Hook (T8420) Central Screw Central Screw Cap Wire Nuts Plate Screws Install Floodlight Camera to the junction box outdoors (you need to have a junction box and wires already installed).
Login or sign up for a eufy Security account, then follow the onscreen instructions to complete setup. Mount Floodlight Camera Outdoors Step 1 Unplug Floodlight Camera. Step 2 To avoid risk of shock, injury or death, always be cautious when working with electricity. Unscrew the power cord; wire nuts will be used later. The power cord is not required when mounting the Floodlight Camera outdoors. Make sure you can livestream video from Floodlight Camera before mounting.
Step 3 Step 5 Shut down the circuit breaker in your house. Switch on/off the lights to make sure the electricity in your house is properly shut off. 1. Hang Floodlight Camera on the junction box with the hook provided. 2. Connect both ground wires(both yellow in color) from the junction box and Floodlight Camera, join the wires by using a wire nut. To avoid risk of shock, injury or death, always be cautious when working with electricity.
3. Use wire nuts to connect Floodlight Camera wires to the rest of the wires from junction box. Connect the white wire on the Floodlight Camera to the white wire(neutral) from junction box. Connect the black wire on the Floodlight Camera to the black wire(hot) from junction box. Step 6 Insert the central screw through the center of Floodlight Camera and screw it tightly. Use the central screw cap to cover the central screw to prevent the central screw from rusting.
Step 7 Safety After installation is complete, you can turn the camera knobs on Floodlight Camera to adjust the camera to your desired angle. FCC Statement Step 8 Switch on the main circuit breaker in the house. To check whether Floodlight Camera is operating, check if the LED indicator has turned solid white. In case Floodlight Camera is not powered on, switch off the circuit breaker before checking the wiring of Floodlight Camera.
under strong sunshine or too wet environment. The suitable temperature for the product and accessories is -20°C-50°C. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C. Please ensure to use only the charger offered by the manufacturer.