01 17 31 45 QUICK START GUIDE eufy Indoor Cam 2K Pan & Tilt FCC ID:2AOKB-T8410 IC:23451-T8410 Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
Table of Contents What’s included 01 Product Overview 02 Setting up the System 03 Mounting the Indoor Cam 05 Powering on the Indoor Cam 10 Notice 11 Customer Service 16
WHAT’S INCLUDED eufy Indoor Cam 2K Pan & Tilt × 1 PRODUCT OVERVIEW eufy Indoor Cam 2K Pan & Tilt Model: T8410 1 Mounting Plate × 1 2 USB Cable × 1 3 USB Adapter × 1 Mounting Screw Pack × 1 User Manual × 1 4 5 6 7 01 English 1 Lens 5 Speaker 2 Microphone 6 Power input 3 SD card slot 7 SYNC button 4 Status LED English 02
SETTING UP THE SYSTEM LED Status LED Status Description 1. Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
MOUNTING THE INDOOR CAM Select a Location for Mounting The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily. • Disconnect the Indoor Cam from the power outlet before mounting. • Keep the eufy Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view.
Mount the Indoor Camera To mount the eufy Indoor Cam on the ceiling, follow the steps below: Ceiling 3. Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws with a Phillipshead screwdriver to fasten the mounting plate to the ceiling. Ceiling Ceiling 1.
To mount the eufy Indoor Cam on a wall, we recommend using the mounting bracket (not provided) as the illustration below. POWERING ON THE INDOOR CAM Connect the eufy Indoor Cam to a power outlet using the provided USB cable and USB adapter. After being powered on, the eufy Indoor Cam will be connected to the system. When it is successfully connected, the status LED will turn solid blue.
NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This product can be used across EU member states. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for T8410 and accessories is 0°C-40°C.
IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
