Quick Start Guide

ManualsBrandseufy SECURITY ManualsElectronicseufyCam Solo, eufyCam Solo Pro

01 02 03 04 05 06

QUICK

START GUIDE

eufyCam Solo / Solo Pro

WHAT’S

eufyCam Solo / Solo

Pro

Model: T8130/T8131

USB Cable Mounting

Bracket

Mounting

Screw Pack

Quick Start

Guide

PRODUCT

eufyCam Solo / Solo Pro

1. LED Indicator

2. Camera Lens

3. Microphone

4. Motion Sensor

5. Photosensitive Sensor

6. SD Card Slot

7. Micro USB Charging Port

8. Mounting Hole

9. SYNC Button

• Press for 2s to enter setup mode

• Press for 10s to reset

YOUR EUFYCAM SOLO / SOLO PRO

CHARGING

eufyCam Solo / Solo Pro comes with a built-in battery. Before setup, fully

charge your eufyCam Solo / Solo Pro using the provided micro USB cable.

Recommended:

Normal Charging:

Solid blue Charging

Fully charged Off

UP EUFYCAM SOLO / SOLO PRO

SETTING

1. Download the eufy Security app from the App Store (iOS devices) or Google

Play (Android devices).

2. Sign up a eufy Security account. Go to the app homepage. Tap Add Device,

and add eufyCam Solo / Solo Pro to the system.

3. Follow the on-screen instructions to complete the setup.

Note: Make sure your eufyCam Solo / Solo Pro is connected to the

HomeBase.

LED Status

Status LED Indicator

Ready for setup Flashing blue

Successfully paired Off

Live streaming or recording Solid red (When LED is enabled)

An alarm triggered Flashing red

Firmware updating Flashing blue and red alternately

THE INDOOR CAM

MOUNTING

Select a Location

eufyCam Solo / Solo Pro can be mounted on a wall or ceiling. Select a

location where you can get the desired view. We recommend hanging it 7-10

ft (2-3 m) above the ground.

Motion

Detection

Zone

Camera field

of view

Up to 30 ft (10 m)

7-10 ft

(2 - 3 m)

Motion

Detection

Zone

Camera field

of view

Mount eufyCam Solo / Solo Pro

eufyCam Solo / Solo Pro can be mounted both outdoors and indoors.

1. Turn the knob of the mounting bracket clockwise to loosen and

disassemble it.

2. Place the mounting bracket against the wall. Drill holes with a 15/64 inch

(5.99 mm) drill bit, then insert the anchors into the holes; anchors are

necessary for walls that are made out of hard materials such as concrete,

brick, or stucco.

3. Firmly screw the base of the mounting bracket onto the wall. Fasten the

ball knob of the bracket to the base of the bracket.

INCLUDED OVERVIEW

Summary of content (2 pages)

PAGE 1
QUICK START GUIDE eufyCam Solo / Solo Pro 2 INCLUDED 3 PRODUCT OVERVIEW eufyCam Solo / Solo Pro CHARGING YOUR EUFYCAM SOLO / SOLO PRO eufyCam Solo / Solo Pro comes with a built-in battery. Before setup, fully charge your eufyCam Solo / Solo Pro using the provided micro USB cable. 4 5 SETTING UP EUFYCAM SOLO / SOLO PRO 1. Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
PAGE 2
4. Tighten eufyCam Solo / Solo Pro to the mounting bracket. Rotate the eufy Indoor Cam to adjust the view and check it using the live stream which you can access in the eufy Security app. eufyCam Solo / Solo Pro can be also installed on the ceiling. Follow the steps 1-4 mentioned above to install it. You are now all set to use your eufyCam Solo / Solo Pro. Tips: For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status.