FCC ID:2AOKB-T8114 IC:23451-T8114 QUICK START GUIDE EUFYCAM 2 WIRE-FREE HD SECURITY 2-CAMERA SET Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
TABLE OF CONTENTS What's Included 01 05 Mounting the Camera Product Overview 02 10 Charging eufyCam 2 Connecting the HomeBase 2 03 11 Safety Statement Setting Up the System 04
1 2 WHAT’S INCLUDED PRODUCT OVERVIEW HomeBase 2 For HomeBase 2 installation 1 2 7 3 HomeBase 2 (T8010) Power Adapter for HomeBase 2 Ethernet Cable Metal Pin for Resetting 4 5 6 1. Status LED 2. Speaker 3. Power port 4. USB port For eufyCam 2 installation 5. Ethernet port 6. SYNC/ALARM OFF button 7. Reset button eufyCam 2 1 eufyCam 2 (T8114) Micro-USB Charging Cable Indoor Mount Hook (for Indoor Mount) 01 Mounting Bracket 5 Mounting Screws and Anchors 1.
3 CONNECTING THE HOMEBASE 2 Connect the HomeBase 2 to the Internet 1. Power on the HomeBase 2, then use the ethernet cable provided to connect the HomeBase 2 to your home router. 4 SETTING UP THE SYSTEM Download the App and Set up the System Download the Eufy Security app from the App Store (iOS devices) or Google Play (Android devices). Sign up for a Eufy Security account, then follow the onscreen instructions to complete the setup. 2.
MOUNTING THE CAMERA Select Height and Location Hang eufyCam 2 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor of eufyCam 2. Avoid placing eufyCam 2 under direct sunlight. Find a Good Mounting Spot To find a spot to mount eufyCam 2, you need to test wireless signal strength. Camera field of view Motion Detection Zone 7-10 ft (2 - 3 m) ① Open the Eufy Security app, go to Camera Settings > Mounting Guide.
Mount the camera outdoors Mount the camera outdoors The camera can be mounted both indoors and outdoors. 3. Firmly screw the base of the mounting bracket onto the wall. Fasten the ball knob of the bracket to the base of the bracket. 1.Turn the knob of the mounting bracket clockwise to loosen and disassemble it. 4.Tighten eufyCam 2 to the mounting bracket and adjust the viewing angle by checking the live stream feed in the Eufy Security app. 2. Drill holes with a 15/64 inch (5.
Mount the Camera Indoors Stick the camera directly to any flat surface made out of iron. Or you can use the indoor mount to mount the camera: 1. Drill a hole. Use the included anchor if it’s drywall and fasten the hook. 6 CHARGING EUFYCAM 2 Charge eufyCam 2 a Method 1 2. Hang the indoor mount on the hook. Method 2 3. Attach eufyCam 2 to the indoor mount and adjust the viewing angle.
7 SATETY STATEMENT FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Customer Service Warranty 12-month limited warranty Call Us United States United Kingdom Germany +1 (800) 988 7973 +44 (0) 1604 936 200 +49 (0) 69 9579 7960 Mon-Fri 9am-5pm (PT) Mon-Fri 6am-11am (GMT) Mo-Fr 6:00-11:00 Email Us Customer Support: support@eufylife.