FCC ID:2AOKB-T8010 IC:23451-T8010 QUICK START GUIDE EUFYCAM 2C WIRE-FREE HD SECURITY CAMERA SET Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
TABLE OF CONTENTS Getting Started 01 05 Mounting the Camera Product Overview 02 07 Charging eufyCam 2C Connecting the HomeBase 2 03 10 Safety Statement Settings Up the System 04
01 02 GETTING STARTED PRODUCT OVERVIEW HomeBase 2 For HomeBase 2 installation 1 2 7 3 HomeBase 2 (T8010) Power Adapter for HomeBase 2 Ethernet Cable Metal Pin for Resetting 4 5 6 1. Status LED 2. Speaker 3. Power port 4. USB port For eufyCam 2C installation 5. Ethernet port 6. SYNC/ALARM OFF button 7. Reset button eufyCam 2C 7 2 eufyCam 2C (T8113) Micro-USB Charging Cable Mounting Bracket 1. Camera quantity and accessories vary by bundle package. 2.
03 CONNECTING THE HOMEBASE 2 Connecting the HomeBase 2 to the Internet 1. Power on the HomeBase 2, then use the ethernet cable provided to connect the HomeBase 2 to your home router. 04 SETTING UP THE SYSTEM Getting the App and Setting up the System Download the Eufy Security app from the App Store (iOS devices) or Google Play (Android devices). Sign up for a Eufy Security account, then follow the onscreen instructions to complete the setup. 2.
05 MOUNTING THE CAMERA Height and Location Hang eufyCam 2C 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor of eufyCam 2C. Avoid placing eufyCam 2C under direct sunlight.
Mounting the camera Mounting the camera The camera can be mounted both indoors and outdoors. 3. Firmly screw the base of the mounting bracket onto the wall. Fasten the ball knob of the bracket to the base of the bracket. 1.Turn the knob of the mounting bracket clockwise to loosen and disassemble it. 4.Tighten eufyCam 2C to the mounting bracket and adjust the viewing angle by checking the live stream feed in the Eufy Security app. 2. Drill holes with a1/4 inch (6.
06 CHARGING EUFYCAM 2C Charging eufyCam 2C Method 1 07 SATETY STATEMENT FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
the Device under strong sunshine or too wet environment. The suitable temperature for HomeBase 2 and accessories is -10°C-45°C. The suitable temperature for eufyCam 2C and accessories is -20°C-50°C. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C. Please ensure to use only the charger offered by the manufacturer.
