IL. Unpack 4 = Negative/Slide Film Holder User Manual Woes T USB power core USB cable Video cable Clean brush Note <» We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface periodically to produce a clear image during operation.
Note < To avoid mirror image, follow the serial numbers {from left to right) on top of film when install negative film into holder | hb aE Figure 1 < If the image is upside down [see fig.2], the image can be corrected by Flip function In hard key of device before capture, or enter playback edit menu after capture [see fig.3.4].
Down/Flip button (Flip hard key) oy Flip ® Press hard key on top of device In live view Figure 3 ® Playback mode menu Figure 4
Hl.
7. After finished the capture, take out the SD card which stored capture images a 8.
IV. Operation Guide Home: Main menu USB mode Capture Playback Film Type USB mode Setting Capture: capture mode (default) Playback: playback mode Film Type: define the film type which loaded in cartridge USB mode: MS DC (Mass Storage Device Class) mode Setting: TV out and format option 1. Capture Capture After welcome page, above menu will remains for 5 sec. User can press up/down button for desired menu. Or system will auto enter Capture mode if there is no action during this 5 second period. a2.
1.2 Capture mode Live view indicator {flashing at 0.5sec rate) Once enter capture mode, there will be a red indicator on left top corner to indicate Ht Is In live view mode. When the film cartridge Is Inserted into the scanner slot, the Image always shows the positive Image according to previous defined Film Type (after power on. the Film Type is default to negative film). Reconfirm the film position through the display before press OK button. 1.
1.4 Live View -> Capture/Edit Menu Live View Discomfiture Menu Tem TTT Once press OK button in live view, the edit menu will be appeared. When user press OK button again, the current image will be saved Into SD card. The display will return to five view again. 1.5 Capture: Save Once user press OK button on top of preview (live view) image will be selected and shown on the TFT which will take between 3-4 second with 4 icons shown on the left side of the screen.