Tracker GT100 Installation and User Guide Version 1.1 Model No.
Copyright ©2010 EU3C Company Limited Reserved® All rights reserved. This publication is protected by federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission from EU3C.
00Table of Contents Chapter 1 Introduction .................................................................................................................... 1‐1 1.1 Preface ................................................................................................................... 1‐1 1.1.1 Technical Support ....................................................................................... 1‐1 1.1.2 Privacy and Other Guidelines ................................................................
Table of Contents B.2 Status Indicators .....................................................................................................B‐2 Appendix C Short Messages (SMS) Format for GPS Data ...............................................................C‐1 C.1 SMS Location Symbols and Abbreviations .............................................................C‐1 C.2 SMS Remote Commands ........................................................................................C‐1 C.2.1 Park Status .....
Chapter 1 Introduction 1.1 Preface This document provides operating instructions for configuring and using the Tracker GT100 device. Note that the Tracker GT100 comes with preset settings which allows one to start using the Tracker GT100 by simply inserting a SIM card and powering up the device. To get up and running quickly, please refer to the Quick Start Guide. 1.1.1 Technical Support For further questions, contact EU3C as follows: • By internet: www.eu3C.com • By email: supports@eu3c.
Introduction 1.2.1 Key Features Know the whereabouts of loved ones Use the Tracker GT100 to easily track loved ones without the need of a PC. Call the Tracker GT100 from any mobile phone Place the Tracker GT100 with a loved one No. 1294 Southgate Ave & Lakeshire Dr, 244 yds EDISON ELEMENTARY; South San Francisco, California, W122.48353, N37.
Introduction SOS Panic Button for Personal Security Press and hold the red SOS button for three seconds and the Tracker GT100 will call 911 if the user enables this function. SOS button Functions as a Remote Monitor The Tracker GT100 can function as a baby monitor that allows remote voice monitoring through a cell phone. Serves as a Child’s Phone The Tracker GT100 can serve as a child’s phone with simple-to-use pre-programmed buttons for making and receiving calls.
Introduction Stolen Vehicle Recovery Device The Tracker GT100 can help police track and recover a vehicle if it gets stolen by acting as a transmitter in the vehicle. GPS Position Trace Log on a PC By enabling the Trace Logging feature, the Tracker GT100 will record its position on to a flash card, allowing the user to download the device’s GPS position history. The Trace Log can be used to reproduce the device’s positions on your PC.
Introduction 1.2.2 Tracker GT100 package contents You should get the following items when you open your Tracker GT100 box: • Tracker GT100 • Lithium ion battery • Charger - power adapter with USB cable for either power outlet charging or PC-connected charging • USB cable1 - USB cable used for interfacing with Tracker Tool software and downloading GPS position trace log • Micro SD memory card - used for storing map database and user settings.
Introduction 1.2.3 Safety Notes The Tracker GT100 complies with Parts 15B, 22H, 24E, OET65(SAR) of the FCC Rules. Operation is subject to the following conditions: 1-6 1. The Tracker GT100 may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operations. 2. The Tracker GT100 is a GSM enabled GPS tracking device. Pay special attention to local laws and general health and safety regulations. 3.
Chapter 2 Installing the SIM Card, Battery, and PC Tracker Tool 2.1 Installing the SIM Card and Battery Install the SIM card1 and battery as follows: 1. Gently push down on the raised arrow of the back cover and slide off the battery cover. 2. Lift the SIM card cover. 3. Place the SIM card in its respective holder. 4. Carefully lower the cover in place and slide it down until it clicks securely. 5. Insert the battery and ensure that the battery contacts are at the top right corner. 6.
Installing the PC Tracker Tool 2.2 Installing the PC Tracker Tool 2.2.1 Minimum System Requirements • PC running Win98/Win2000/Windows XP/Windows Vista • CD-ROM drive • USB 2.0 port 2.2.2 Installation The PC Tracker Tool is a Windows program that allows you to change the setting of the Tracker GT100. 2-2 1. Make sure the Tracker GT100 is not plugged into the computer. 2. Insert the Tracker Tool CD into the CD-ROM drive 3. Wait for the installation menu screen to appear.
Chapter 3 Using Your Tracker GT100 3.1 Understanding the Buttons and Indicators SOS button Speaker Park button USB port Help/Assist button LED indicator Hang-up button (Power ON/OFF) Answer button Microphone Preset dial keys Item Keylock slider Function Description Answer button Answer incoming voice call Press the Answer button to pick up an incoming call. Park button Activate the motion detection alert function Press the Park button for three seconds to activate.
Charging the Tracker GT100 3.2 Charging the Tracker GT100 3.2.1 Charging the Battery Using the USB Cable 3.2.
Powering Up the Tracker GT100 3.3 Powering Up the Tracker GT100 1. Press the Power ON/OFF button and hold for over four seconds. 2. The Tracker GT100 will power ON and enter Standby mode as it acquires a satellite signal. Longer satellite searching time may occur when powering up the Tracker GT100 for the first time or if the Tracker GT100 has been moved to another state or country since the last time it was used. 3.
Powering Up the Tracker GT100 3-4 Proprietary to EU3C Company Limited Reserved Tracker GT100 User Guide
Chapter 4 Using the PC Tracker Tool 4.1 Starting the PC Tracker Tool The PC Tracker Tool configuration software is used to program all of the features and settings of the Tracker GT100. These settings include the preset phone numbers for emergency calls, standby time, etc. 1. Power down the Tracker GT100. 2. Connect the Tracker GT100 to a PC using the USB cable. 3. Run TrackerTool.exe on the PC. 4.
Changing the Contact List Settings From the Contact List Settings screen, the following settings can be configured: • Restrict incoming calls or allow calls from anyone Select the Anyone button to allow calls from anyone. Select Only the following numbers to restrict incoming calls and then click the Add button to add numbers to the incoming call list or click the Remove button to remove a number from the incoming call list.
Configuring the SMS Display Settings 4.3 Configuring the SMS Display Settings From the Display Settings screen, the following settings can be configured: • Location message format • Distance unit Use the pull-down arrow button to select the distance unit (e.g., KM for kilometers) Click the Update button to send the new settings to the Tracker GT100.
Setting the Help Options 4.4 Setting the Help Options From the Help Options screen, the following settings can be configured: • Help message period Click the pull-down arrow to select the desired time period in which the Help message will be broadcast. • Select the Help button option Click the Send location message with "Help" prefixed to send the word, "Help" before the location message. Click the Send location message to send the location message without the word "Help.
Configuring the Park Settings 4.5 Configuring the Park Settings From the Park Settings screen, the following settings can be configured: • Bread crumbing Use the pull-down arrows to set the time interval the Tracker GT100 will use for its Trace Logging function to mark its position.
Configuring the Surveillance/Remote Monitoring Settings 4.6 Configuring the Surveillance/Remote Monitoring Settings From the Surveillance/Remote Monitoring Settings screen, the following settings can be configured: • Enable or disable Surveillance mode Select Function disabled to disable the Surveillance function. Select Enable to enable the Surveillance function. • Restrict incoming calls or allow calls from anyone Select the Anyone button to allow calls from anyone.
Configuring the Power Rule Settings 4.7 Configuring the Power Rule Settings From the Power Rule Settings screen, the following settings can be configured: • Enable or disable Auto power ON/OFF mode Select Function disabled to disable the auto Power ON/OFF function. Select Auto power on to enable the auto power ON/OFF function. Use the up and down arrow buttons to set the time the Tracker GT100 will be powered on and the time the device will be powered down.
Changing the Direct Dial Settings 4.8 Changing the Direct Dial Settings From the Direct Dial Settings screen, the following settings can be configured: • Enable or disable the direct call out function Select Function disabled to disable the direct call out function. Select Enable to enable the direct call out function. • Enable or disable the dial in answer function Select Function disabled to disable the dial in answer function. Select Enable to enable the dial in answer function.
Configuring the Speed Alert Settings 4.9 Configuring the Speed Alert Settings From the Speed Alert Settings screen, the following settings can be configured: • Enable or disable the speed alert function Select Function disabled to disable the speed alert function. Select Send message to the following numbers to send a speed alert to the user or others when the speed alert function has been triggered.
Configuring the Tracking Log Settings 4.10 Configuring the Tracking Log Settings From the Tracking Log Settings screen, the following settings can be configured: • Time interval for logging GPS coordinates Use the pull-down arrow button to set the time interval in which the Tracker GT100 will log its GPS coordinates. • Trace log storage full notice Use the pull-down arrow button to set the capacity percentage that will trigger a notice indicating the trace log is full.
Changing the Password 4.11 Changing the Password From the Administration Settings screen, the following settings can be configured: • Password Use the field boxes to enter the old password and new password. Re-enter the new password in the field box and then click the Apply button. Clicking the show characters while typing box will allow the characters to appear as they are typed; otherwise, dots will appear as they are typed.
Changing the Password 4-12 Proprietary to EU3C Company Limited Reserved Tracker GT100 User Guide
Chapter 5 Troubleshooting 5.1 Frequently Asked Questions Tracker GT100 does not power on. Make sure the device is fully charged with a valid SIM card. Press and hold the Power ON/OFF button until the device powers up. The power light remains lit after power on. This occurs when the Tracker GT100 cannot receive a GPS signal. Tracker GT100 cannot receive a GPS signal. An open view to the sky is required. If using the Tracker GT100 device for the first time, it may longer than normal.
Frequently Asked Questions I cannot dial in to get the device location. You need to either enable dial in from anyone or numbers from the contact list using the Tracker Tool program. I cannot use Park function. Make sure the Park feature is enabled. Help/Assistance key doesn't work. Make sure Help function is enabled and the help preset phone numbers are entered correctly in the contact list. I cannot dial in the device and use it as a phone. Make sure the Direct Call feature is enabled.
Appendix A Technical Specifications Parameter Specification GSM module GSM900/1800 or GSM850/1900 GPS module MT3326 Tracking sensitivity -162 dBm Positioning accuracy < 20m Speed precision 0.
Technical Specifications A-2 Proprietary to EU3C Company Limited Reserved Tracker GT100 User Guide
Appendix B Tracker GT100 Functions and LED Status B.1 Functions Function Setting Description SOS/911 Press and hold the red SOS button for three seconds Automatically dial preset emergency number (911) Surveillance Enable the surveillance function in the Tracker Tool program. The caller’s phone number must be pre-programmed in the "Allow calls" list. The caller dials in and waits for over 8 seconds.
Tracker GT100 Functions and LED Status B.
Appendix C Short Messages (SMS) Format for GPS Data C.1 SMS Location Symbols and Abbreviations Symbol Definition , , , North of, South of, West of, East of , , , Northeast of, Northwest of, Southeast of, Southwest of yds, m Yards, meters & Cross street symbol C.2 SMS Remote Commands C.2.
Short Messages (SMS) Format for GPS Data C.3 SMS Format There are three types of SMS messages that can be sent out from the Tracker GT100. C.3.1 Street Number, Point of Interest (POI), and GPS Coordinates • Section 1: Location address with the house number + nearby intersection • Section 2: Distance and direction to a nearby POI • Section 3: City, State • Section 4: Coordinates For example: No. 1294 Southgate Ave & Lakeshire Dr, 244 yds EDISON ELEMENTARY; South San Francisco, California, W122.
Short Messages (SMS) Format for GPS Data C.3.2 Location Inside a Major POI • Section 1: Location direction of POI + nearby POI • Section 2: Distance from an address + direction from the closest address + nearby cross street • Section 3: City, State • Section 4: Coordinates For example: Portal Park; 72 yds 10177 N Portal Ave, N Portal Ave & Amherst Dr; California South San Francisco, San Mateo, California; W122.02021, N37.
Short Messages (SMS) Format for GPS Data C.3.3 Location When Traveling on a Highway • Section 1: Highway name + moving direction • Section 2: Distance closest to an exit + closest exit name • Section 3: City, State • Section 4: Coordinates For example: I-280 SB; ; 2102m; Exit "25"; Santa Clara, California; W121.95059, N37.