Dual Mode Noise-Isolating Headset User Manual
Table of Contents Introduction..............................................................................4 Included....................................................................................5 Bluetooth Profiles ....................................................................5 Identification ............................................................................6 Dual Modes–Two Ways to Use..................................................7 Pairing ........................................
Introduction The Etymotic etyBlu dual mode, noise-isolating headset contains two microphones. One microphone is located internally at the end of the earpiece; the other, BLUmaxx™, a highly directional, noise-rejecting microphone quickly connects to the earpiece. The combination of an in-ear noise-isolating earphone and a directional microphone placed close to the mouth provides exceptional sound quality and clear communication at both ends of the conversation.
Included • • • • • • • • etyBLU Dual-Mode Noise-Isolating Headset BLUmaxx Quick-Connect Mic Earloop Assorted eartips Windscreen Filter changing tool with replacement filter Storage case USB charging cable Bluetooth Profiles Compliant with Bluetooth® Core Specification 2.1, Headset 1.1 and Handsfree 1.5 profiles (supports Bluetooth 1.1 and later) Talk Time: Up to 7 hours Standby: Up to 100 hours Range: 30 feet (10 meters) Weight: Less than .
Identification etyBLU with BLUmaxx connected and earloop No boom, no earloop B A E C C D D F G Internal Microphone H A. Eartip B. Speaker C. Multi-Function Button (MFB) D. Volume Up/Down E. Optional Earloop F. Earloop Holder G. Jack for BLUmaxxMic and Charging Cable H.
Dual Modes—Two Ways to Use Internal Mic Mode The earpiece is designed to be self-supporting in the ear canal, so the earloop is optional. Push the earloop through the earloop holder and adjust for a secure fit. BLUmaxx Mic Mode Exceptional clarity in noisy environments. - Gives up to 25 dB more noise cancellation of the talkers voice compared to the internal mic. Important: To ensure optimal performance it is important that the eartip seals the ear canal.
Pairing Pairing varies by device The etyBLU headset is discoverable for five minutes after Power On. • • • • Turn the phone OFF and then back ON. Turn on the mobile phone’s Bluetooth function. Press and hold the Multi-Function Button (MFB) for 5 seconds. The blue LED will flash rapidly when ready for pairing.The etyBLU stays in pairing mode for 5 minutes. Activate the search for BT and/or audio devices on the phone When the etyBLU is found, the phone will display “etyBLU.
Charging The etyBLU headset comes with a rechargeable lithium polymer battery. Charge the headset for at least one hour before first use. Charging time from empty: 2-3 hours 80% charge: 1 hour Charging with the USB connecter (included) • Remove the BLUmaxx Mic prior to charging • Plug the connector into the etyBLU headset as shown. • Plug USB end of the charging cable into a computer USB port as shown. • The solid yellow LED will indicate that the headset is charging.
Insertion Important: Sound quality and noise isolation depend on a good eartip seal. • Carefully insert the earpiece while pulling up and out on the back of the ear. For a video on proper earphone insertion go to • Twist the earpiece while inserting www.etymotic.com until outside noise is blocked out. • Position the earpiece for best fit and comfort. • Flanged eartip: Moistening eases insertion. • Foam eartip: Roll down or compress foam eartip before inserting.
BLUmaxx Connect/Disconnect NOTE:The BLUmaxx Mic can quickly connect or disconnect without disconnecting a call. Hold here to connect/disconnect Noise-canceling microphone Connector To Connect 1.The plug on the BLUmaxx Mic is designed to connect to the headset only one way. Do not force the plug into the jack. It will connect easily. 2.
Multi-Function Button (MFB) Power ON PRESS the MFB for 4 seconds to MFB Power On. Blue LED is solid for one second while powering ON. Blue LED blinks when the headset is ON. Power OFF PRESS the MFB for 4 seconds to Power Off. Yellow LED is solid for one second then powers OFF. Volume PRESS the Volume UP (+) and Volume DOWN (-) buttons on the side of the headset to increase or decrease volume. The exact number of volume levels is set and maintained by the phone.
Multi-Function Button (MFB) The following features depend on phone support: Redial PRESS and HOLD the MFB (long press) for one second. Voice Call PRESS the MFB quickly (short press) to make a voice call. Voice Call works when the unit is in standby.
Earpiece Filter The earpiece in the etyBLU headset has a special filter that smoothes the frequency response and prevents earwax from entering the earphone.The filter is located at the end of the earphone and is visible when the eartip is removed. Change the filter if loudness decreases or the sound quality declines. Note: Filters are not reusable. Filter Removal 1. Remove eartip. 2. Insert tool into the filter. 3. Remove filter. Filter Replacement 1.
Caution Consult an audiologist or physician if you have excessive ear wax, difficulty inserting the eartips, or discomfort after prolonged use.The etyBLU dual-mode headset excludes most external sounds. Always use extreme caution while using any headset when operating a motorized vehicle. Do not use the headset at excessively loud levels. Research confirms that earphones that seal the ear canal allow listeners to listen at safer levels.
FCC & Other Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC & Other Information FCC Health and Safety Information Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.The FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage.This product has been evaluated and found to comply with the FCC’s exposure criteria.
Proper Care • Do not expose the headset to extreme temperatures. • Avoid dropping and strong impact. • Leave an eartip on the headset for shock protection. Cleaning/replacement of eartip • Clean or replace a flanged eartip prior to use by others. • Replace a foam eartip prior to use by others. • Clean a flanged eartip by simply wiping it off with a soft cloth. If water and mild soap are used, remove the eartip, clean and dry it before replacing it on the headset. • Replace disposable foam eartips regularly.
About Etymotic Research Etymotic Research has spent twenty-five years developing in-ear technology for auditory research, precision monitoring and critical listening. Etymotic has developed many innovative hearing technologies available today. Etymotic’s products are used by musicians and others who insist on superior sound quality. Etymotic means“true to the ear.” Warranty Etymotic Research, Inc.
LED Chart Power ON Blue LED is solid for one second while powering on Power OFF Yellow LED is solid for one second then powers off Pairing Blue LED blinks twice every 3 seconds Active call Blue LED blinks once per second No active call Blue LED blinks every 4 seconds Charging Solid yellow LED Low battery Blinking yellow LED Charge complete Yellow LED off ETYMOTIC RESEARCH INC. 61 Martin Lane • Elk Grove Village, IL 60007 www.etymotic.com • 1-888-389-6684 ©2008.