User Manual
CAUTION Etymotic earphones exclude most external sounds. It is unsafe to use in-ear earphones while operating a motorized vehicle, operating machinery, bicycling or jogging, because you may not be alerted to potential danger. In rare instances an eartip may come off in the ear canal when removing the earphone. If this should occur and the eartip cannot be easily removed, it is recommended that you promptly contact an audiologist or other medical professional.
IN THE BOX Foam 3-Flange A Large 8-13 mm C Small 7-11 mm Black 8-13 mm D E G B A. Earphones B. Detachable, 5 ft cord with 3.5 mm gold plated stereo plug C. 1 ⁄4" stereo phone adapter D. Assortment of eartips E. Filter removal tool and replacement filters F. Shirt clip G. Zippered storage case H. Performance certificate (not shown) Accessories are available at www.etymotic.
IDENTIFICATION Cable Connector Eartip Earphone Body Cable Connector unsnaps from Earphone Body Braided Cable for extended flex life Keytab Notch Splitter Cable Gold Plated 3.
able ded e SELECTING AN EARTIP Large 3-flange 8-13 mm Small 3-flange 7-11 mm Foam 8-13 mm The eartips that are most comfortable are the best choice, but they should seal well in the ears for best noise isolation and sound quality. When changing eartips make sure the eartip fits securely on the stem of the earphone. correct incorrect NOTE: Hold the earphone body–not the cable connector–when removing the eartips to avoid accidentally detaching cable.
PROPER INSERTION Important: Sound quality, full bass response and noise isolation all depend on a good eartip seal in the ear canal. See a video demonstration of how to get a proper fit at www.etymotic.com • While pulling up and out on the back of the ear carefully insert the earphone. • Twist the earphone into the ear canal while inserting, until outside noise is blocked out. • 3-flange eartips: Moistening eases insertion. • Foam eartips: Roll down or compress foam eartip before inserting.
SHIRT CLIP Attaching the Clip Shirt clip attaches to the splitter cable. Note: Securing splitter cable helps reduce cable noise. CORD SLIDER Using the Slider Slider is used to snug the cable under the chin to help secure the earphones.
DETACHABLE CABLES Detaching Cables Note: Do not pull or twist from the cable connector. It's important to pull straight out. 1. Grab the body of the earphone. 2. P ull the cable connector away from the earphone body. Do not twist. Pull straight out to prevent damage to the key tab. Attaching Cables Note: If the key tab is not aligned with the notch, snap will not engage. Notch 1. Align the key tab with the notch in the body of the earphone and cable connector. 2.
t It's out. CHANGING FILTERS Etymotic earphones have special filters that smooth the frequency response and prevent earwax from entering the earphones. A filter is located at the end of the earphone and is visible when the eartip is removed. If a filter becomes clogged, it should be replaced. A dirty filter will reduce earphone output. The filter should be changed if loudness decreases or the sound quality declines. Note: Filters are not reusable. Filter Removal Note: Use the tool to remove the filter.
CLEANING AND REPLACING EARTIPS Over time eartips may lose their elasticity. For best performance and retention, replace 3-flange eartips every 60-90 days. Replace foam and glider eartips frequently. To clean 3-flange eartips: 1. Remove the eartip from the earphone. 2. Clean with water and mild soap. 3. Dry the eartip before placing it back on the earphone. IMPORTANT • Do not expose the earphones to extreme temperatures. • Avoid dropping and strong impact.
WARRANT Y Etymotic Research, Inc. warrants this product against defects in material or workmanship for a period of two years from the date of original purchase from an authorized Etymotic distributor or reseller. Etymotic will repair or replace the defective product at its option if returned within the warranty period to our service facility.
ETYMOTIC RESEARCH INC. 61 Martin Lane • Elk Grove Village, IL 60007 www.etymotic.