Spec Sheet

Description
The PACEQ-1 is our top of the line
interface designed to be used with
any ETS PM1 professional series
microphone (or any other balanced
48v phantom powered or dynamic
professional microphone). The
PACEQ-1’s output connects to the
‘microphone input or ‘audio input’ of
an IP camera, DVR or other
equipment. The PACEQ-1 features
XLR inputs and outputs, a 7 band
equalizer and high quality
compressor limiter.
Includes:
 PACEQ-1 Interface box
 12VAC 300ma Power Supply
 1ea 6’ RCA-RCA Patch cord
 Installation instructions.
Options
 SPECIFY: RCA OR 3.5mm
input / output connectors.
Wiring Requirements
Microphone cable run: Stranded 22-
gauge, 2-conductor shielded cable or high
grade “microphone” cable. Distances up
to 500 feet.
Warranty
1 year parts and labor. Made in USA
PACEQ-1 Interface Specifications
 Microphone input connectors: XLR or
direct wire terminal block.
 Ultra low noise microphone pre-amplifier
 Adjustable microphone pre-amp gain: 26db to
40db
 Input impedance 1K Ohms.
 Input: RFI and transient protected
 Integrated 48Vdc regulated phantom power
supply
 Phantom power on/off switch
 Equalizer: 7 frequency band controls: 60hz,
150hz, 400hz, 1Khz, 2.5Khz, 6Khz, 15Khz. +/-
12db gain / cut for each
frequency band.
 Equalizer on/off switch
 Built in Compressor/ peak limiter
 Threshold adjustment: –40 to 20db
 Compression ratio continuously variable be-
tween 1:1 and Infinity:1
 Two line level outputs: XLR balanced and RCA
(or 3.5mm) unbalanced.
 Output level control: +/- 20db
 Outputs short circuit protected.
 Output impedance: 100 Ohms.
 S/N ratio: better than 60db (EQ off)
 Frequency response 20HZ-30Khz (EQ. off)
 Power consumption, 30ma@12Vac.
 Auto-reset fused
 Power indicator
 Weight: .25lbs
 Dimensions: L 5.3 x W 3.3 x H 1.6
PACEQ-1 Phantom Powered Microphone
Pre-amplifier / 7 Band EQ / Compressor
Electronic Technical Services Inc.
211 Conchas SE
Albuquerque, NM 87123
PH 505-888-3923 FAX [phone]
Sound Surveillance
tm