Printed Matter No. Issue No. Date Page Tracking base Product Instructions Model Tracking base Part number 6158133350 Download the latest version of this document at http://www.desouttertools.com/info/6159925540_EN WARNING Read all safety warnings and instructions Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.
Table of Contents Product Information .............................................................................................................................. 3 General Information......................................................................................................................... 3 Warranty............................................................................................................................... 3 Website ........................................................
EN Product Information Product Information General Information WARNING Risk of Property Damage or Severe Injury Ensure that you read, understand and follow all instructions before operating the tool. Failure to follow all the instructions may result in electric shock, fire, property damage and/or severe bodily injury. ► Read all Safety Information delivered together with the different parts of the system.
Product Information C EN mm in. 40 1.57 CAD files For information about the dimensions of a product, see the Dimensional drawings archive: https://www.desouttertools.com/resource-centre Overview Virtual cable Virtual cable is a Desoutter solution based on the UWB (Ultra-Wide Band) technology. It prevents the operator to use the tool outside a predefined area, named Working space.
EN Product Information Technical data Power supply PoE: 48 V USB-C: 5 V Power consumption PoE 20 mA LPS (Limited Power Source) on PoE power supply Maximum PoE power supplied: 15.4 W USB-C 180 mA Weight 0.280 kg 0.
Product Information EN Wireless Communication specifications Frequency: 3.2 – 6.75 GHz power - 0.
EN Installation Installation Installation Requirements Read before installing • Trackers mounted on tools must be always visible by the tracking base. • Avoid metallic structure between trackers and tracking base. • All devices (tracking bases, trackers) must be inside 15/20 m (49/65 feet) radius from the Master tracking base. • When the communication is set to USB, the Master Tracking Base cannot be positioned more than 5 m (16 feet) from CONNECT.
Installation EN Select USB if the tracking base has to be connected physically to the USB port of CONNECT. Click Write. Select Ethernet if the tracking base has to be connected to the Ethernet port of CONNECT. Enter the IP address of the tracking base (192.168.5.151 by default), its sub-net mask (255.255.255.0 by default) and the gateway (127.0.0.1 by default).. Click Write. Write down the tracking base MAC address.
EN 1 2 3 Installation Tracking base CONNECT inside panel External PoE injector Plug an Ethernet cable to the PoE injector (in) and to the Ethernet port of the tracking base. Plug an Ethernet cable to the PoE injector (out) and to CONNECT. Installation Before mounting the tracking base, refer to the instructions given in the chapter Read before installing [Page 7] in this manual. 1. 2. Open the mounting screw access door located on the front panel of the tracking base.
Installation EN Item Indicator Description 5 UWB indicator - if case of a Master tracking base, the LED lights up in green and remains steady at the initialization when communication with both CONNECT and Virtual cable settings have been correctly done. - in case of standard tracking bases, the LED lights up in green and remains steady when the communication is done with the Master tracking base. The LED lights up in red as there is no communication between the trackers and the Master tracking base.
EN Operation Configuration Instructions How to set up Virtual cable Read before starting 1. 2. 3. 4. Tightening tools are equipped with trackers. Each tightening tool has been associated to a tightening unit and is ready to run a Pset. Trackers have to be declared in CONNECT. The Master tracking base has to be set up with CONNECT. Working spaces can be set up by using CONNECT or CVI CONFIG. Note the MAC addresses of tracker and tracking base and keep them available.
Operation EN 4 - Check the communication between the Master tracking base and CONNECT Tap "Configuration > System > Peripherals > Tracking system > Check". Tap "Check". When the communication is correct, a tick is displayed. How to create a working space with CONNECT 1 - Create a Virtual cable system associated to a tracking base Tap "Configuration > System > Peripherals > Tracking system > Infrastructure". Tap this icon. Choose a name. Tap the List button to open the list of existing tracking bases.
EN Tap the green tile. Tap this icon. Customize the name of the working space. Tap the Empty list button to open the list of existing tightening units. Tap the tightening unit to select it. The box turns light grey. Tap this icon to validate. The tightening unit has been selected. 3 - Activate the UV for the tightening unit using the working space Go to CVI CONFIG. Check that CONNECT is connected to the computer. Create a working area, add CONNECT, check the IP address.
Operation EN 4 - Finish the creation of the working space Repeat the activation of the tightening unit until the following screen. Tap "Create zone with tool". The box turns light grey. Tap this icon to go to the next step. Check the tool is connected. Unplug and plug the battery pack. Click REC. Move with the tool to the minimum distance and press the trigger. Move then to the maximum distance and press the trigger. Click STOP. Tap this icon to go to the next step.
EN The working space for this tightening unit is done. Swipe the tile to the left to control that the tightening unit is correct. Swipe again to Edit or Delete the working space. 4 - Fine-tune manually Click Edit. Click the figures and change them if required. Tap this icon to validate. Tap this icon to quit. 5 - Run a Pset to test the settings Run a Pset in the working space.
Operation EN See in the screen above, the green anchor attesting that the system is working correctly. When the tool is outside the working space, "E931" is displayed on the tool display. Press OK to quit. Operating Instructions Using the Virtual cable solution The tool is enabled when the operator uses the tool inside the working space. The tool is disabled if the operator goes outside the working space. The user info "I931 - Tool locked by Tracking system" is displayed on both CONNECT and tool display.
EN Troubleshooting Troubleshooting Trouble-shooting for Virtual cable No communication between Master tracking base and CONNECT Check first the status of the Power supply indicator of the Master tracking base. This LED lights up in green and remains steady when the power supply is correctly provided. Check then the physical communication between the Master tracking base and CONNECT. In case USB communication is used: 1. 2. 3. Verify you have declared the correct USB port.
Troubleshooting EN No communication between Master tracking base and additional tracking bases 1. 2. 3. 4. Check the communication between CONNECT and Master tracking base. Refer to the previous section. Check the status of the power supply indicator of the additional tracking bases. This LED lights up in green and remains steady when the power supply is correctly provided. Verify that Master tracking base and additional tracking bases are using the same UWB radio channel.
EN 2. 3. Troubleshooting Verify that the working zone infrastructure is using the correct tracking base. Verify the working zone definition (distance min. and distance max.). Tool still locked in the correct working zone 1. 2. 3. 4. 5. 04/2020 Verify the communication between the Master Tracking base and trackers. Refer to the previous section. Check the communication (if used) between the Master tracking base and additional tracking bases. Refer to the previous section.
Original instructions Founded in 1914 and headquartered in France, Desoutter Industrial Tools is a global leader in electric and pneumatic assembly tools serving a wide range of assembly and manufacturing operations, including Aerospace, Automotive, Light and Heavy Vehicles, Off-Road, General Industry. Desoutter offers a comprehensive range of Solutions -tools, service and projects- to meet the specific demands of local and global customers in over 170 countries.
