A8015ZT A8015RVS Bedienungsanleitung Geschirrspüler instruction book dishwasher
Contents Safety instructions 19 Disposal 19 Economical and ecological dishwashing 19 Description of the appliance 20 The control panel 20 Prior to using for the first time Setting the water softener Filling with salt Rinse aid 21 21 21 22 In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Use of "3 in 1" combi detergent tablets 23 23 23 23 24 24 25 25 Washing programmes 26 Starting a washing p
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. ● This information has been provided in the interest of your safety.
Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser (type A / type B) 5. Control panel 6. Rating plate 7. Rinse aid dispenser (type A / type B) 8. Filters 9. Lower spray arm 10. Upper spray arm 11.
Prior to using for the first time Before using your dishwasher for the first time: Filling with salt 1. Ensure that the electrical and water connections comply with the installation instructions. Special salt can be added in one of two ways: 2. Remove all packaging from inside the appliance. ● If you are using dishwasher detergent that already contains salt, the detergent including the salt is placed in the detergent compartment.
Rinse aid Filling with rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. (Rinse aid dispenser type A) 1. Open the container by turning the lid (A) anticlockwise. 2.
In daily use ● Check if it’s necessary to refill with special salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. ● Loading cutlery and dishes When loading the dishes and cutlery, please note: - Dishes and cutlery must not impede the rotation of the spray arms . - Load hollow items such as cups, glasses, pans, etc.
The upper basket Adjusting the height of the upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of the dishes in upper basket lower basket Arrange items on and underneath the cup racks so that water can reach all surfaces.
Use of detergent Use of "3 in 1" combi detergent tablets Only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Prior to the start of a wash programme. The detergent is released during the washing phase. Please observe the manufacturer’s dosing and storage recommendations as stated on the detergent packaging. General advice These products are tablets with combined detergent/rinse-aid and salt functions. 1.
Washing programmes Programme Daily 65°C with prewash Daily 65°C no prewash Degree of soil and type of load Normal soil. Crockery, cutlery, pots and pans Normal soil.
Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely Unloading the dishwasher Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. Leave the dishes in the dishwasher for approx. 15 minutes, with the door ajar, after the end of programme so that they dry better and will be cooler.
Maintenance and cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). To ensure a correct working of the dishwasher, NEVER try to remove the upper spray arm. Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...there are problems when operating the dishwasher The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button. Press the On/Off push button to switch the dishwasher off and carry out the following suggested corrective actions.
If after all these checks, the problem persists, contact your local consumer services department, quoting the model (Mod.), product number (PNC) and serial number (S.N.). This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). So that you always have these numbers at hand, we recommend you to make a note of them here: Mod. : . . . . . . . . . . . . . . . . . . PNC : . . . . . . . . . . . . . . . . . . S.N. :. . . . . . . . . . . . . . . . . . .
Installation instructions Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Do not use, for connection, old hoses which have been used in another appliance. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Remove all packaging before positioning the machine.
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following ways: Information concerning the electrical connection is given on the rating plate on the edge of the dishwasher’s door on the right. 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. Before plugging the appliance into the wall socket, make sure that: 1.
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).
152972 75/0 Änderungen vorbehalten Subject to change without notice 0 11/02