Specification
Double End Bypass Technology
• Smart Switch technology ensures safe, reliable
operation
Smart Switch Technology
Never worry about ballasts again!
• Ballasts will fail! Avoid future ballast failures
that are often seen after installing Type A (ballast
compatible) retrots lamps.
• No “ballast compatibility” issues especially with
multi-lamp per ballast troffers
• No ballast noise and eliminate ballast power
consumption
• 4’ T8, 12w, 1800 Lm., 4000K or 5000K
• 8’ T8, 43w, 5500 Lm., 5000K
• 4’ T5, 25w, 3500 Lm., 5000K
• Wide 210° beam angle
• 120-277V
• >80CRI
• Temp rating -4°F - 113°F
• L70 >50,000
• 5 year limited warranty
Complete linear LED solution 4’ T8, 8’ T8
EZ Install “double end power” design
No need to replace shunted sockets
Simple ballast bypass rewiring
Available in standard and shatter resistant
glass
Ultra low T8 12w LED delivers payback in
less than 6 months!
Get 15-25% greater energy savings versus
45% lower installation costs* versus single end
*($8/tube for EZ install vs. $15/tube for Type B single end)
ADVANTAGE
EZ Install Bypass Ballast Retrot
North American Headquarters
720 Northgate Parkway
Wheeling, IL 60090
Customer Service
1-855-384-7754
Visit Us Online
www.ETiSSL.com
DOUBLE END POWER
Up to 150 LPW
08/10/2020