Lighting Control Switch User Manual Product Name: Lighting Control Switch MC054V- RC- 2A Model No.
Lighting Control Switch eatures1. Features Version: A0 Operating voltage 120~277V AC, suitable to Euro & North American market. Patented microwave antenna, mounting height is 15m Max, suitable to install in most of warehouses. Supports high-sensitivity and low-sensitivity modes (for metal ceilings, metal reflector mounting environments) Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function.
Lighting Control Switch Hold time 5s/30s/1min/3min/5min/10min/20min/30min Stand-by DIM Level 10%/20%/30%/50% Stand-by Period 0s/10s/1min/3min/5min/10min/30min/+∞ Detection Area 25%/50%/75%/100% Version: A0 5lux/15lux/30lux/50lux/100lux/150lux/Disable (Ambient light diffusion) Wireless Module Operating Environment Detecting Radius See note 2 Mounting Height 15m Max Detecting Angle 150°(wall mounting), 360°(ceiling mounting) Operating Frequency N/A Transmitting power N/A Transmitting dis
Lighting Control Switch Version: A0 Note 1. “N/A”means not available. 2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height person and walking speed is 0.5m/s. 1.
Lighting Control Switch 4.
Lighting Control Switch Version: A0 2) MC054V- RC- 2D 5.Wiring （Europe,Australia version） （USA version） *The sensor is designed for connect one load only. Connect more than one loads may damage the sensor.
Lighting Control Switch Version: A0 6.Function Diagram 7.
Lighting Control Switch Version: A0 Slow moving Slow moving Slow moving Slow moving Slow moving (Speed 0.3m/s) (Speed: 0.3m/s) (Speed: 0.3m/s) (Speed: 0.3m/s) (Speed: 0.3m/s) *Only 100%/75%/50% detection sensitivity is workable when installed at 10m & 15m mounting height. 25% sensitivity is not able to detect motion signal. Wall mounting Horizon mounted height: 2m Sensitivity: 100%/75%/50%/25% Slow moving (Speed 0.
Lighting Control Switch Version: A0 8.Remote Control 9. Initialization 1/ On/Off function /3-step dimming function: After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement. 2/ 2-step dimming function: After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it dims the light to a low light level (set by stand-by dim level).
Lighting Control Switch Version: A0 10. Factory Setting Detection area: 100%, Hold Time: 5S, Stand-by Period: 0s, Stand-by dim level: 10%, Daylight Sensor: Disable 11.Application Notice 1) The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switch. 2) The sensor which installed in the plastic and glass lampshade will reduce the sensitivity.
Lighting Control Switch Version: A0 11 FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
