User's Manual

VibraThotic User’s Guide
1.) How to Use:
• VibraThotic Insoles are easy to use. Simply remove the insole from your shoes and
replace them with the VibraThotic Insoles.
• If the VibraThotic Insoles are a too big, trim them to fit.
• Click the remote control to start the vibrating motor.
• Continue clicking the remote control until the desired level of vibration is achieved.
• Click the bottom button on the remote control to turn off.
• Replace your VibraThotic Insoles every as needed by regular wear and tear.
2.) Trimming:
You can trim the insoles with large scissors to fit inside whatever shoes you wear. Do not
trim excessively as the more insole you retain the better the vibration. DO NOT TRIM
within ½” of the Vibration Pod which is placed in the center of the insoles.
3.) Remote Control:
To control the vibration levels in the insoles, simply click the top button on the remote
control until the desired level is attained.
4.) Water Resistance:
VibraThotic Insoles are NOT water proof. This means they should not be submerged in
water. DO NOT WEAR VibraThotic Insoles in shoes that will be worn while walking or
hiking in streams, lakes, the ocean, or any other bodies of water.
The Key Fob is not water resistant or water proof and should not get wet.
Specifications:
Your VibraThotic Insoles are made from EVA (Ethylene-Vinyl Acetate) with a small
vibrating motor inside each sole.
The motor makes a slight humming sound when it is working. If you go someplace that
requires silence, you can simply turn the motor off with the key fob and continue to wear
the insoles.
RF Frequency: 315MHz
RF Range: max 3m
Battery Capacity: 500mAh
Working Hours: about 3 hours of continuous work at maximum level,
Standby Hours: about 250 hours