ZAP Remote Model Nos.: ;"1 - 5Y ;"1 - 3Y Questions or Concerns? (855) 686-3835 support@etekcity.
Thank You. Thank you for purchasing the Remote Outlet by Etekcity. We are dedicated to providing our customers with quality products for building on better living. Should you have any questions or concerns about using your new product, feel free to reach out to our helpful Customer Support Team at support@etekcity.com.
Table of Contents Safety Information Function Diagram Operation Reprogramming an Outlet Resetting an Outlet Troubleshooting Specifications Package Contents Warranty Information Customer Support 4 6 8 10 12 14 15 15 16 21
Safety Information IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using this device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned herein may result in physical harm and/or damage to the device. Important Safety Information • The wireless range may be limited by other electronic devices, appliances, walls, or other physical barriers.
• Do not use appliances such as refrigerators, air conditioning units, and washing machines with the outlets. Such appliances exceed the maximum load current of 10A (~1200W). • Keep out of reach of children. • The outlets are best used in areas with proper air circulation. • When cleaning, use a dry cloth to wipe the outlet and remote surfaces. • For your safety, make sure the batteries within the remotes are correctly installed before use. • Do not dispose of any part of this product in a fire.
Function Diagram 2 3 1. 2. 3. 4.
5. Remote 6. ON Buttons 7.
2. Operation The outlets are pre-programmed for immediate use, but the configuration can be customized to meet your needs. 1. Install one 12V (23A) battery in each remote control. 8 Plug each outlet into a powered socket.
3. Plug an appliance into each outlet. Make sure the appliance is switched to ON in order to allow the outlet to control the device. 4. Press the ON or OFF buttons for the corresponding outlet number on the remote. The indicator light on the corresponding outlet will turn on or turn off, confirming that the outlet is now in use.
Reprogramming an Outlet 1. 2. Unplug device from outlet. Press and hold program button until indicator light starts to blink.
3. Release program button, press the ON or OFF button for the desired number on the remote. ON 4. Pairing is successful when indicator light stops blinking. NOTE: You may repeat the reprogramming steps to assign up to 10 outlets to a single number to simultaneously control multiple devices with a single click.
Resetting an Outlet 2. To remove an outlet from all remote control pairings: 1. Unplug any devices connected to the remote outlet. 12 Remove the outlet from the power socket.
3. 4. Press and hold the program button. Plug outlet back into power socket while continuing to hold program button. 5. 6. Program Button 13 Hold program button for approximately 5 seconds until LED indicator begins to flash. Program reset will be complete when indicator light stops blinking.
Troubleshooting Issue Solution Outlet is unresponsive to remote commands. Replace the remote batteries with new 12V (23A) batteries. Low battery power may decrease readable wireless remote range. Make sure the outlet and device are properly connected and powered on. Make sure that the outlet is placed in an area with proper air circulation to avoid overheating. Make sure the maximum load current of 10A (~1200W) isn’t being exceeded. If so, unplug the device from the outlet immediately.
Package Contents Specifications Voltage: 120V~60 Hz Maximum Current: 10A Maximum Power: 1200W Transmission Frequency: 433.92 MHz Remote Battery Power: 12V (23A) Remote Control Range: 100 ft (30 m)* Operating Temperature: 32°~95°F (0°~35°C) Storage Temperature: -4°~167°F (-4°~75°C) *NOTE: The wireless range may be shortened by other electronic devices, appliances, walls, and other physical barriers.
TERMS & POLICY Warranty Information Product Name ZAP Remote Model Number ZAP 1L-Rx Etekcity warrants all products to be of the highest quality in material, craftsmanship, and service effective from the date of purchase to the end of the warranty period. Etekcity will replace any product found to be defective due to manufacturer flaws based on eligibility. Refunds are available within the first 30 days of purchase. Refunds are only available to the original purchaser of the product.
states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. This warranty is non-transferrable.
If you are unable to provide the order number for your product, please type a short note in the order number field along with the date you received your product. Defective Products & Returns Should your product prove defective within the specified warranty period, please contact Customer Support via support@etekcity.com with your invoice and order number. DO NOT dispose of your product before contacting us.
FCC statement to the user This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help.
Customer Support Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is ours! CUSTOMER SUPPORT Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 SUPPORT HOURS Monday - Friday 9:00 am - 5:00pm PT Email: support@etekcity.com Local: (657) 500-1872 Toll-Free: (855) 686-3835 *Please have your order confirmation number ready before contacting customer support.
Scan here and join the community! http://www.etekcity.
