User’s Manual Q10 Bluetooth Wireless Speaker Page 1
Welcome | Thank you for purchasing the Q10 Introduction Features ------Page 2 Qi® Certified Wireless Charging Pad High powered Bluetooth® speaker Wireless streaming through Bluetooth enabled devices Built-in microphone Auxiliary input to play music from any device Automatically connects to any paired devices
What’s included Unpack the speaker system and make sure all accessories are put aside so they will not be lost.
Content Introduction Features What’s Included Safety Information Warning! Important Safety Instructions Getting Started Location of Main Unit Controls Charging the Q10 LED Status Indicator Powering ON/OFF 2 3 5 6 8 9 9 10 Operational Instructions Charging Your Device 10 Bluetooth Operation 11 Setting up your Q10 for pairing 11 Pairing a Bluetooth device for the first time 11 Using the auxiliary input connection (3.
Safety Information Warning! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS. The lightning flash and arrowhead symbol within the triangle is a warning sign alerting you of “dangerous voltage” inside the product. WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Safety Information Important Safety Instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this user’s manual and on the unit. 1. 2. 3. 4. 5. 6. 7. 8.
9. 10. 11. 12. 13. 14. 15. 16. Power Cord protection - Power supply cord should be routed so that it is not likely to be walked on or pinched by items placed upon or against them. It is always better to have a clear area from where the cable exits the unit to where it is plugged into an AC outlet. Lightning - Unplug the unit from the wall outlet and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time.
Getting Started Location of Main Unit Controls 1 Front View 2 3 4 5 Back View 6 7 8 9 10 1. Charging Pad 2. Increase Vol / Skip to next track 3. Play / Pause Music 4. Decrease Vol / Skip to previous track Page 8 5. 6. 7. 8. 9. 10. Power On/Off LED Light - Bluetooth Indicator 3.
Getting Started Charging the Q10 1. Connect a Micro USB charging cable to the charging port on the Q10. 2. Connect the USB end of the Micro USB cable to your computer’s USB port or an AC USB adapter. 3. When the speaker is charging, the LED indicator light located on the back of the speaker will turn red. 4. Once the speaker is fully charged, the LED indicator light will turn off. LED Status Indicator Bluetooth LED Indicator - Blinking Blue LED: Bluetooth on with no connection.
Getting Started Powering ON/OFF 1. Press the power button to turn on the unit for charging. 2. Press the power button twice to turn off the unit. 3. Press and hold the power button until you hear an ascending audible tone and the Bluetooth LED light starts blinking, indicating the unit is ready to pair and ready to use the the charging pad. 4. To power the speaker off, press and hold the power button until you hear a descending audible tone. The Bluetooth LED light will turn off.
Operational Instructions Bluetooth Operation The Q10 connects with most Bluetooth devices inlcuding iPad® devices, iPhone® devices, and iPod® touch devices, and most smartphones, laptops, and tablets. Setting Up Your Q10 for Pairing 1. Press and hold the power button until you hear an ascending audible tone. 2. The Blue LED light will start to flash, indicating that the Q10 is now ready to be paired with your Bluetooth device. Pairing a Bluetooth Device for the First Time 1. 2. 3. 4.
Operational Instructions Using the Auxiliary Input Connection (3.5mm) You can connect the audio output of an external device, such as a MP3 player or smartphone, to the Q10 for listening to the audio of that device through the speaker system. 1. Use a standard stereo headphone (3.5 mm) cable to connect the “headphone-out” or “audio line-out” of the device to the aux-in jack of this speaker system. 2. Turn on the speaker system (enter Bluetooth Mode) and the external device (eg. MP3-player or smartphone). 3.
Troubleshooting Symptom Solution Music is not streaming over Bluetooth -- Check if both devices are paired and connected over Bluetooth. -- Make sure there isn’t a 3.5mm cable connected to the aux input on the back of the speaker. -- Restart the Q10 to auto-connect with your Bluetooth device. No power -- Recharge your speaker using included cable. If the problem persists try a different Micro USB cable. Battery is not charging -- Verify Q10 is plugged in properly and into a proper power source.
Compliance with FCC Regulations Caution! The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warranty Information Limited Warranty The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1 (888) 920-8680 from the USA or Canada. Concept 101 LLC warrants to the original purchaser that the product will be free from defects in material, parts and workmanship for the period designated for this product.
Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Obtaining Service: To obtain service, product literature, supplies or accessories please call 1 888-920-8680, or visit our website, www.att.
www.att.com/electronics The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The ‘Qi®’ symbol and Qi are registered trademarks of the Wireless Power Consortium. iPhone, iPod, and iPad are registered trademarks of Apple Inc., registered in the U.S. and other countries. Other trademarks and trade names are those of their respective owners. © 2019 Concept 101 LLC. All Rights Reserved.
