Product Info

ManualsBrandseSYSTEMS MTG ManualsElectronicsIC-CPD

Model: IC-CPD

Brand: Porsche

Model: IC-CPD

Sales-, or Trade name of the model IC-CPD: Porsche Mobile Charger Connect

HW-Version: 13

SW-Version: PWR-Board: SW_P: 1910

SW-Version: COM-Board: SW_C: 2911 with Power Line Communication (PLC) switched on

Applicant adress: Dr. Ing. h.c. F. Porsche Aktiengesellschaft, Porsche Platz 1,

D- 70435 Stuttgart Zuffenhausen

Product usage: IC-CPD (In Cable Control an Protection Device) Charger for BEV and PHEV,

100-240/400V, 6-40A, 1,3 kW- 22 kW

Receiver sensitivity:

-80 dBm for (2,4 and 5 GHz)

Duty cycle: 30-70%

Size: Please use the information on pages 12-15 of this document.

Weight: 2,54 kg

Humidity range: 0 - 100%, 0-5000 m üNN, (IP55/enclosure 3R). The storage temperatures at the

manufacturer and OEM can range from 20°C/68°F to a maximum of 105°C/221°F

year of manufacture:from 2019

SAR: < 0,1 W/m

Protocols Wireline and Wireless: 802.11.n (a, b, g, n, ac)

Summary of content (16 pages)

PAGE 1
Model: IC-CPD Brand: Porsche Model: IC-CPD Sales-, or Trade name of the model IC-CPD: Porsche Mobile Charger Connect HW-Version: 13 SW-Version: PWR-Board: SW_P: 1910 SW-Version: COM-Board: SW_C: 2911 with Power Line Communication (PLC) switched on Applicant adress: Dr. Ing. h.c. F.
PAGE 2
Technical Description / User Manual for Model: IC-CPD eSystems Project Manager: Grid-Cable name: phone: fax: E-Mail: Frank Beger +49 7022 4003-266 +49 7022 42772 frank.beger@esystems-mtg.de Schematic Drawing IC-CPD CEV-Cable Figure 1: overview IC-CPD (schematic) eSystems MTG GmbH Bahnhofstraße 100 D-73240 Wendlingen 07.08.
PAGE 3
Model: IC-CPD - overview general: Figure 2: Overview IC-CPD general Power: • • • • USA/JAPAN (9,6 kW) (UL) referencing Countries (9,6 kW) IEC/China other countries 7,2 kW, or/and 11 kW, or/and 22 kW IEC referencing countries 7,2 kW, or/and 11 kW, or/and 22 kW Safety: • • • • AC/DC RCD Ground monitor Switched PE (not USA) Temperature sensor in infrastructure plug Connection cable: • • HMI: • Infrastructure side pluggable 0,3 m, 0,9m - 1,7m (Mode2) Vehicle side pluggable 2,5m - 7,5m (USA, ISR, CH, only
PAGE 4
Markets: • Worldwide Housing: • Design COP-A Brand design: • Brand specific HMI and housing Interfaces: • • PLC (Home Plug GreenPhy) WLAN Intelligent charging functions: • • • • • • Automatic activation (alt.
PAGE 5
I. Table of Contents 1. module specification ............................................................................................................................. 6 1.1. Supply ............................................................................................................................................ 6 Precontroller p3V8................................................................................................................................. 6 1.2. CPU ........................
PAGE 6
The IC-CPD is a ”Mode2, “In Cable Control and Protection Device”, for charging electric vehicles BEV and PHEV with integrated protection to avoid overheating and electrical hazards. It includes WLAN/PLC-communication for value added services. A. The COM-Board is the user and communication interface for the uses to use the complete system. Access is guaranteed in different national languages, see “User Manual”. 1. module specification 1.1.
PAGE 7
1.3. Wireless 1.3.1 WLAN MURATA: LBEE6U4XQC-182 Modul - 2,4 GHz, 802.11.n (a, b, g, n, ac) (Channel 1-11) 5 GHz, 802.11.n (a, b, g, n, ac) (Channel 36-48) 802.11b 802.11g 802.11n 802.11a 802.11ac band 2.4GHz 2.4GHz 2.
PAGE 8
1.3.3 Circuit diagram of the module CONFIDENTIAL CONFIDENTIAL Figure 5: Circuit diagram of the WLAN/WiFi module 1.3.
PAGE 9
Figure 5b: Antenna WLAN/WiFi module 2,4 GHz Figure 5c: Antenna WLAN/WiFi module 5 GHz
PAGE 10
1.3.5 WLAN Access Point - No DFS, no Radar detection. - Access point only in 2,4GHz. 1.4. PLC (Power Line Communication) Frequency: from 1,8 MHz to 30 MHz (fixed notching) Standard: Home Plug Green PHY - Interface LVDS Figure 6: Architecture LVDS COM-Board 2. Electrical safety COM board is connected only to PWR-Board and is powered by SELV/PELV voltage 13Vdc. The COM board has no outputs/inputs to the user. The charging cable itself has protection class IP55/enclosure 3R. 3.
PAGE 11
B. The Power-Board (PWR-Board) for a IC-CPD (In Cable Control and Protection Device) for Mode2 based on IEC 62752: 2016, UL2231, UL2594 and China for Mode3 based on IEC 61851 3.Ed. 4. Complete block diagram PWR-Board CONFIDENTIAL Crystal 16 MHz Figure 7: PWR-Board block diagram 4.1.
PAGE 12
I.
PAGE 13
II.
PAGE 14
Figure 10: example: Porsche Figure 10 a + b: Contact assignment of both sides of the IC-CPD
PAGE 15
Figure 11: example: Porsche
PAGE 16
Figure 12: example: Porsche