iRV Touchscreen Controller iRVCT7 User Manual
1. Operation Guide Power On/Off The control panel will be automatically on when connected to electricity and off when disconnected to electricity.
Set Up Screen Lights Control 2
Slides Control Awnings Control 3
Utilities Control HVAC (Option) Control 4
Monitor Water Level Generator (Option) 2. Smartphone Control 2.1 Phone App An iPhone or Android phone can connect to iRVCT7 by Bluetooth and operate all the control functions. You simply go to Google Play store or Apple store to search and install iRV control” app. Notes: iPhones must be iPhone 6 or later model. Android phones must Android 6 or later OS.
2.2 Pairing Phones This device uses smart pairing technology and no password is needed. However, you must use the iRV control app to search and pair. Also, the phone must be within 1 foot of the device during the pairing period. After pairing, you can operate all functions up to 50ft from the control panel. No pairing is needed afterward. The pairing is easy. After you open iRV Control App, you simply follow the on-screen messages. Notes: 1.
2.
3. Voice Control Operation The voice can do only on/off function of utilities such as lights, heaters and pumps. For safety, it cannot operate slides, awning, jack, or other features.
iRVCT7 Utilities Control After voice wake up, you must speak Turn on” + the exact words on utility/light button (see above photo) to operate. You must say the exact words and cannot change order. For example, if you say Turn” + Entry Light” + on”, the controller will ignore your voice command. 3.1 One voice command a time After waking up, you can speak and execute only one command. You must speak Hello RV” again and do the next function. 3.
4. IO Ports 5. Specifications Maximum Operating Voltage⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ 14.4V Minimum Operating Voltage ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ 10.5V Operating Temperature ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ ⋯ -20~60℃ Chassis Outline Dimension⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯9.09(W)*5.63(H)*1.26(D) 6. Packing List (1) iRVCT7 Touchscreen Controller (2) Installation Screws (3) User Manual 7. Installation The installation of IRVCT7 only can be started after the installation of iRVBB1 relay box. 7.
7.2 Mounting the controller Use the mounting hole diagram to measure and cut a mounting Hole. Mount the unit using four #8 PH (0.164” x 0.75”) screws for the controller Warning RV manufacturers may use different wiring and wire colors for different RV floor plans. You must ask RV manufacturers for proper instructions before any installation or modification of this product. Incorrect connections may damage devices, cause fire or other lethal result.
FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
