User’s Manual MD-100
Version 1.0 01/2019 All rights reserved. Copyright © …. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form, by any means (electronic, photocopying, recording, or otherwise) without the prior written permission of the publisher.
Table of Contents Contents Table of Contents .............................................................................................................................................................. 3 Introduction ...................................................................................................................................................................... 4 Explanation of Advisements .................................................................................................
Transporting the MD-100 Device ....................................................................................................................... 23 8. Safety ................................................................................................................................................................. 23 9. Trouble shooting .........................................................................................................................................................
Explanation of Advisements In this manual we use three (3) levels of Advisements as follows: The Note symbol is used for notifying the user of something important or of something that needs special attention. The Caution symbol is used to inform of something that could cause harm to, or malfunction of, the equipment. The Warning symbol is used to inform of something in which there is a conceivable risk of harm to the user if the Warning is ignored.
2. Exploring Your Device Package Contents In addition to the primary tablet unit, your product carton should contain all of the below items. MD-100 Tablet PC Packing Contents AC Adapter AC Power Cord Battery Pack Stylus Tether Documents Packing Lists, etc.. Please inspect all items. If any items are missing or appear damaged, please inform your dealer immediately. This packing list applies to standard models. Select models may have different items.
Device Layout Front View Item 1 2 3 4 5 6 7 8 9 10 11 12 Component Finger Print Reader MIC Ambient Light Sensor Front Camera Power LED Indicator Charge LED Indicator Function Key 1 Function Key 2 Windows Key Volume + Button Volume - Button Power Button Description Provides Fingerprint Authentication and Security for your device (if equipped).
Left-side View Item 14 15 Components Barcode Reader (Optional) Audio Description Optically Scans 1D or 2D Barcodes, if Equipped 16 17 USB 3.0 HDMI Connect headphones, speakers, or another external audio device. Connect any external USB device or storage volume. Connect a secondary display via HDMI. Component Barcode Reader Button Stylus Tether Hole Description Press to activate Barcode Reader Scanning Device (button will be deactivated if tablet not equipped with barcode reader).
Bottom View Item 20 Component Docking Connector Description Connects the tablet with the Tablet Docking Station Right-side View Position 21 22 23 24 25 Components CAC Card Reader IO Cover Lock DC in RJ45 Port Speaker Description For reading Common Access Card for ID authentication. Cover the IO port for waterproof. Direct current (DC) power for charging/using the tablet. 10/100/1000 MB network port Sends out sound and voice.
Rear View Position 26 27 Components Stylus Tether Hole LED 28 Stylus pen 29 30 Rear Camera Hot Swappable Battery Lock Hot Swappable Battery SIM Slot MicroSD Slot 31 32 33 Description Stylus can be tethered to this hole. Flash light, controlled by P1&P2 button, Press P1 to turn on the Flash light and P2 to turn off. Serves as the input device by tapping on the touchscreen to make selections and enter information. Allows you to use the camera function.
4. Managing Device Power AC adapter The AC adapter accepts 100-240VAC Input. A standard US polarized, grounded three-pin plug adapter is included. International plug AC adapters are available for certain regions. Use only the AC adapter included with your Tablet PC. Using other AC adapters may damage the device.
Battery Pack The MD-100 device has one small, permanent, internal battery and one hot-swappable battery. When hot swappable battery has low voltage and needs to be replaced, the built-in battery will power the tablet for up to 10 minutes. To charge the Battery Pack: 1. 2. 3. 4. Connect the power cable to the charging port on the device. Connect the power adapter to an electrical outlet and charge the tablet until the battery is fully charged.
Hot Swapping the Battery Pack The MD-100 Tablet PC battery can be replaced without shutting down the tablet or interrupting your work, by use of the built-in battery. The built-in battery can sustain power for up to 30 minutes, during which period the swappable battery must be changed to prevent loss of function. To swap the battery, lay the tablet on a flat surface, and pull the two tabs indicated towards the edges of the tablet. The battery will pop loose and a replacement can be slid into place.
Internal Battery The internal battery is not user-replaceable and is not visible to the operating system. It never functions as the power source as long as the hot swappable battery pack is installed. It enables the hot-swapping function, since it provides power only when the battery pack is removed. The internal battery should not be used to power the tablet during regular operation.
5. Using optional features Using the CAC (Common Access Card) Card Reader This device may include an internal CAC card module for ID authentication. Its location is shown in chapter 2 (Position 21). For more details, see Technical Specifications in Appendix A. Users can insert the smart card into the Reader, please follow the instructions in the specific software for your application to use CAC card function properly.
Using the Finger Print Reader This device may include an internal Finger Print Reader module to identify a person's fingerprint for security purposes. Its location is shown in product layout in Chapter 2(Position 1). For more details, see Technical Specifications in Appendix A. Place your finger on the scanner. Please follow the instructions in the specific software for your application touse finger print reader function properly.
Using the Barcode Reader This device may have an optional internal Barcode Reader module. It is an optical input device used to capture and read information contained in a bar code. Most common 1D and 2D barcode formats can be read. The location of the reader is shown in the product layout in Chapter 2 (Position 14). Press the physical scan button on the tablet to activate the scanner. A barcode placed win the scanner field of view will be read.
USING GPS This device may include an internal GPS module for navigation.Pplease follow the instructions in the specific software for your application for GPS applications. For more details, see Technical Specifications in Appendix A. If you want to check whether the GPS hardware is working properly, you may use eController app to test. See Chapter 6: eController App and its Applications. Using the Digitizer Pen MD-100 Tablet offers either a standard, passive stylus (Digitizer Pen) or an active stylus.
6. eController App and its Applications The eController App is designed to quickly check if device modules are working properly. It tests the following modules: 1. 2. 3. 4. 5. Fingerprint Reader CAC (Common Access Card) Card Barcode Scanner GPS Assign function to programmable buttons F1 and F2. Most of the above the modules are optional items. If the eController top menu bars are greyed out or unselectable on certain items, the related modules are not installed (or have been disabled).
Fingerprint scanner When activated, the user may place a fingertip on the scanner, and the scanner will read the print and display it in the indicated area of the screen, until removed. The fingerprint scanner will operate continuously once this test is selected until exited. To preserve battery and enable all tablet functions, please exit the test when complete. CAC Card Reader When activated, the user may place an enabled card into the chip card reader.
Barcode Scanner To test the barcode scanner, select the barcode test, point the scanner at a barcode (or QR code), and press the SCAN button on the screen or press the physical scan button on the handle of the tablet. System will quickly scan and display the barcode information on screen. Press the button again to read the barcode again. The displayed info will refresh and display the new barcode information. Please aim the laser at the center of barcode. Do not place the scanner too far from barcode.
GPS The eController GPS test is based on Chart cross Limited APP. Turn on Location Services. The App will automatically run and check the GPS signal, satellite positions, your current location, speed, heading and altitude. In the graphic below: 1. 2. 3. 4. 5. 6. GPS signal bar chart, showing the signal strength for each satellite detected, as well as the accuracy and status of the GNSS network. Satellite positions in the sky, shown on a rotating compass.
7. Product Care Temperature & Humidity General Use - Operating temperature The MD-100 is best kept in dry conditions at room temperature.
The MD-100 device contains two rechargeable batteries. All rechargeable batteries degrade over time. Thus, the possible usage times for the MD-100 after a full charge can become shorter over time than when the device was new. The MD-100 device uses a Li-ion Polymer battery. If you are in a hot environment, be aware that it can affect the ability to charge the battery. The internal temperature must be between 0 ℃/32 ℉ and 45 ℃/113 ℉ for the battery to charge.
2.3 Electricity The device contains no user serviceable parts. Do not open the case of the MD-100 Tablet Device. Doing so will void the product warranty and may expose you to electrical hazards. 2.4 Software Using an antivirus program is strongly recommended. Software other than that which is pre-installed on the MD-100 is installed at the user's own risk. External software could cause the MD-100 to malfunction and might not be covered by the warranty. 2.
Appendix A Ruggedness Processor GPU OS Security System Memory Storage Button LCD Touch Screen Digitizer (Option) Audio Camera Wireless GPS (Option) CAC card reader (Option) Technical Specifications IP-65 Waterproof Drop: 4FT drop resistant on 4 corners to plywood (MIL-STD-810G) Shock resistant: MIL-STD-810G, method 516.6, procedure I ESD Protection: 4KV touch, 8KV air Ultra-LCD protection (Option) Intel® Apollo Lake N4200 Quad-core, base 1.1GHz, Burst 2.
Finger Print Reader (Option) Barcode scanner (Option) Sensors Battery I/O Mechanical AC adaptor Environmental Regulatory Capacitive Compliant to FIPS 201 Built-in 1D/2D (QR) Barcode Reader, support multi 1D and 2D code Lighting: Red LED 625±10 nm Gyroscope, Light sensor, compass. 40 WH Hot Swappable battery with voltage meter (3S1P, 11.1V, 3700mAh) Internal Battery, 30 minutes run time for battery hot swap (2S1P, 7.4V, 440mAh) 1x USB 3.0 @1.5A Type A 1x HDMI output: Type A 1x Audio jack (3.
Appendix B Compliance Information B1 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment . Modifications not expressly approved by Device Manufacturer could void the user’s authority to operate the equipment under FCC rules.
