User’s Manual MJ-80
Version 1.0 01/2019 All rights reserved. Copyright © …. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form, by any means (electronic, photocopying, recording, or otherwise) without the prior written permission of the publisher.
Table of Contents Contents Table of Contents .............................................................................................................................................................. 3 1. Introduction ......................................................................................................................................................... 5 Explanation of Advisements ..........................................................................................................
Appendix A Technical Specifications .......................................................................................................................... 21 Appendix B Compliance Information ......................................................................................................................... 22 B1 FCC Statement .............................................................................................................................................. 22 Part 15B Equipment .....
1. Introduction Welcome to your MJ-80 Tablet PC. To ensure the optimal performance of this product, please take the time to read this manual carefully. The MJ-80 is a rugged tablet intended for medical or commercial uses. Explanation of Advisements In this manual we use three (3) levels of Advisements as follows: TheNotesymbolisusedfornotifyingtheuserofsomethingimportantorofsomethingthatneedsspecialattention. TheCautionsymbolisusedtoinformofsomethingthatcouldcauseharmto,ormalfunctionof,theequipment.
2. Exploring Your Device Package Contents In addition to the primary tablet unit, your product carton should contain all of the below items. MJ-80 Tablet PC Packing Contents AC Adapter Documents Packing Lists, etc.. Please inspect all items. If any items are missing or appear damaged, please inform your dealer immediately. This packing list applies to standard models. Select models may have different items.
3.
Left-side View Item 7 8 9 10 11 Components Function Key 1 Function Key 2 USB 3.0 HDMI Audio Description Programmable – Can be used for special functions Programmable – Can be used for special functions Connect any external USB device or storage volume. Connect a secondary display via HDMI Connect headphones, speakers, or another external audio device Right-side View Position 12 Components Fingerprint Reader 13 14 15 MicroSD Slot USB 2.
Rear View Position 16 17 Components Speaker Rear Camera Description Sends out Audio Records Photos/Video 9
4. Managing Device Power AC adapter The AC adapter accepts 100-240VAC Input A standard US polarized, grounded two-pin plug adapter is included. International plug AC adapters are available for certain regions, as it is shown below. Use only the AC adapter included with your Tablet PC. Using other AC adapters may damage the device. Optional Docking Station You can also charge the MJ-80 tablet using an optional, available Docking Station.
Use only the docking station included with your Tablet PC. Using any other docking station may damage the device. Power Supply and Battery Power is supplied to the MJ-80 tablet by one, internal, rechargeable battery. The Android OS will provide warnings to recharge your device at certain power levels as battery power drops. If the MJ-80 device exhausts available battery power, it will shut down automatically until a charger is connected or it is placed in a docking station connected to an AC power source.
Checking the charging Level To check the battery charge level of the MJ-80, use the battery monitor within android system. Power LED Indicators ThePowerLEDwillonlylightwhentheACadapterispluggedin or the device is on the charging dock. Green — Fully charged Blue — Charging 5. Tablet Features Using the Fingerprint Reader (Optional) This device may include an internal Fingerprint Reader moduleto identify a person's fingerprint for security purposes.
Using the Barcode Scanner (Optional) This device may include an optional internal Barcode Scanner module. This is an optical input device used to capture and read information contained in a barcode. Most common 1D and 2D barcode formats can be read. The location of the reader is shown in the product layout in Chapter 2 (Position 4). Press the physical scan button (see Position 7 or 8 in chapter 2, page 8) on the tablet to activate the .
6. eController App and its Applications The eController App is designed to quickly check if device modules are working properly. It tests the following modules: 1. 2. 3. 4. Fingerprint Reader Barcode Scanner GPS Assign function to programmable buttons F1 and F2 Many of the above the modules are optional items. If the eController top menu bars are greyed out or unselectable on certain items, the related modules are not installed (or have been disabled). The eController is not application software.
Fingerprint scanner When activated, the user may place a fingertip on the scanner, and the scanner will read the print and display it in the indicated area of the screen, until removed. The fingerprintscannerwill operate continuously once this test is selected until exited. To preserve battery and enable all tablet functions, please exit the test when complete.
In the graphic below, please see the following elements: 1. 2. 3. 4. 5. 6. GPS signal bar chart, showing the signal strength for each satellite detected, as well as the accuracy and status of the GNSS network. Satellite positions in the sky, shown on a rotating compass. Your current location on the earth shown as text and on a world map. The current position of the sun and the day/night transition curve is also shown.
If you want to program the buttons to a function not on the list, please contact your supplier for instruction. 7. Product Care Temperature & Humidity General Use - Operating temperature The MJ-80 is best kept in dry conditions at room temperature.
When you transport the device for any reason, it is best to use the original casing and packaging materials. It is recommended that you keep the original packaging materials for the MJ-80. If the device needs to be returned to Device Manufacturer for Warranty related issues or repair, it is beneficial that the original packaging or equivalent is used for shipping. Most shipping carriers require at least 2 inches of packing material around the device.
If the Power Supply Cord is damaged it needs to be replaced by Service Personnel only. Do not use the Power Sup- ply Cord until replaced. Disconnect the AC power plug of the Power adapter from the wall socket when not charging the device and disconnect the power cable from the device. Special regulations apply to shipping devices containing Li-ion Polymer batteries. If dropped, crushed, or short- circuited, these batteries can release dangerous amounts of heat, may ignite, and may be dangerous near fires.
8.3 Electricity The device contains no user serviceable parts. Do not open the case of the MJ-80 Tablet Device. Doing so will void the product warranty and may expose you to electrical hazards. 8.4 Software Using an antivirus program is strongly recommended. Software other than that which is pre-installed on the MJ-80 is installed at the user's own risk. External software could cause the MJ-80 to malfunction and might not be covered by the warranty. 8.5 Magnetic Field The MJ-80 device contains magnets.
Appendix A Ruggedness Processor OS Security System Memory Storage Button LCD Touch Screen Audio Camera Wireless GPS Sensors Battery I/O Barcode (Option) Docking (Option) Mechanical Technical Specifications IP-65 Waterproof Drop: 4FT drop resistant on 26 corners to plywood (MIL-STD-810G) Shock resistant: MIL-STD-810G, method 516.6, procedure I ESD Protection: 8KV touch, 15KV air Rockchip RK3368 Octa-core Cortex-A53 1.5G G6110 GPU 4K@60fps H.265 HDMI2.0 with HDCP2.2 Android 7.
AC adaptor Environmental Regulatory Appendix B Dimension: 227 x 151 x 24 mm Weight: 0.75KG 12V 3A input 110 -240V AC in, standard US plug Option: multi-nation plugs Operation temperature: 0-45°C Storage Temperature: -20 -- 60 °C Humidity: 10% to 90% ROHS: Compliant FCC /IATA/IEC62133/IEC60601-1 Compliance Information B1 FCC Statement This device complies with Part 15 of the FCC Rules.
FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical hand-held operations with the device contacted directly to the human body to the sides of the device.