ELECTRIC STOVE HEATER Models: EFS-XB24B; RICUIR24XI OWNER’S MANUAL WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. CAUTION Keep this owner’s manual for future reference. If you sell or give this product away, make sure this manual accompanies this product.
IMPORTANT SAFETY INSTRUCTIONS! WARNING Read all instructions before using this heater! This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater, and keep them away from the sides and rear.
WARNING For residential use only! NOT for commercial use! Any commercial or public use of this heater voids all warranties, and could cause injury. This product is not intended to be a primary heat source. It is for supplemental heat only. INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock! Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! NEVER modify this heater. Doing so could result in personal injury or property damage.
PREPARATION Remove all parts and hardware from the carton. Place them on a clean, soft, and dry surface. Make sure all parts are dry, and the power cord and plug are not damaged. See IMPORTANT SAFETY INFORMATION on pages 2 and 3. Compare the contents with the parts list to make sure nothing is missing. Dispose of all packaging materials properly. Please recycle whenever possible.
ASSEMBLY ALWAYS make sure the unit is unplugged before beginning assembly! NEVER move or clean the heater, or change the bulbs, while it is plugged in. C B A 1) Carefully turn the STOVE (A) upside down and lay it on a clean soft surface. 2) Align the holes in one LEG (B) with the holes in the corner of the stove frame. 3) Thread four SCREWS (C) through the holes in the leg and into the stove frame. Partially tighten the screws with a Phillips screwdriver. 4) Repeat Steps 2 and 3 for the other three legs.
Control Panel Functions CONTROL On / Off OPERATION / FUNCTION ON: Press the power switch ON. The power indicator light will glow, and the flame effect will turn on. OFF: Press the power switch OFF. All functions will turn off. FLAME ADJUSTMENT: This knob controls the brightness of the flame effect. Turn the knob to the right (clockwise) to brighten the flame effect Turn the knob to the left (counter-clockwise) to dim the flame effect.
CARE AND MAINTENANCE ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, changing the light bulbs, or moving this stove. Failure to do so could result in electric shock, fire, or personal injury. NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury. CLEANING Metal: Buff using a soft cloth, slightly dampened with a citrus oil-based product. DO NOT use brass polish or household cleaners as these will damage the metal.
LIMITED WARRANTY This warrants to the original purchaser that this product is free from defects in material and workmanship as of the date of purchase and that it will, under normal use and proper care, remain so for one year from the date of purchase. Missing or initially defective parts will be replaced free of charge during the period of this limited warranty. If parts are unavailable, comparable replacement or refund will be given. The original dated sales receipt is required for all warranty claims.