Product Card

ManualsBrandsEstalky ManualsElectronicsSmart Poc Radio

T: 86 0755-28267073

Brand website: www.estalky.com

NO 1109-1110,C1 Block,bantian international

center,NO 5 huancheng south road,longgang

district,shenzhen

Switch clockwise/counterclockwise:

Switch/back to the next/ previous menu item

● WiFi Connection

Go to the Settings > WiFi interface. Enable the

WIFI option (single click to revert the status),

switch to ﬁnd the right access point you want to

connect to, single click the right access

point then input the password in (Single click to

input uppercase, double click to input lowercase).

Switch to select inputting characters. Click “√” to

conﬁrm / exit the password inputting.

● GPS Location

Go to the Settings > Location interface, single

click to enable or disable GPS location.

● Date & Time Conﬁguration

Go to the Settings > Date&Time interface, single

click to conﬁgure time display format.

● Bluetooth Connection

Go to the Settings > Bluetooth interface, Switch

to choose “PTT Button”, single click to enable

Bluetooth connection, after Scanning for a while,

switch and ﬁnd the right device name, single click

to conﬁrm bonding to the Bluetooth button, others

Bluetooth device please choose “Headset” with

the same operation.

● Cellular Data Connection

Go to the Settings > Cellular data interface,

single click to revert enable or disable cellular

data connection.

● Flashlight

Go to the Settings > Flashlight interface, single

click to turn on/ pff the ﬂashlight. or Press the

Vol- and Programmable button at the same time

to turn on/off it.

● Battery Percentage

Go to the Settings > Battery percentage interface,

single click to show / hide the battery percentage

status on the display screen.

● Language

Go to the Settings > Language interface, switch

and single click to choose the right language.

● Factory Reset

Go to the Settings > Reset interface, under the

interface “Are you sure about recovery?”, switch

the options, choose “Yes” to reset and “No” to exit.

● System Information

Go to the Settings > About interface, ﬁnd the

device and SIM card information including

Operation System Version, IMEI Code, Battery

Percent, SIM Name, SIM Level, SIM Type.

● System Update

Go to Settings > System Update interface, single

click to check updates.

● Push-To-Talk Application

Go to the PTT item, single click to enter in the

PTT application interface. Switch between

different groups to execute instant communication

Connect the IP smart terminal and power

adapter using the USB Data Cable.

Red light on the IP smart terminal indicates

battery charging in progress.

Lights off indicates fully charged.

WARNING: DO NOT USE THE ABOVE TWO

CHARGING METHODS SIMULTANEOUSLY.

Important:

Use only the approved and certiﬁed charger.

Battery must be fully charged before ﬁrst use.

Do not expose the battery to high temperature.

Do not dismantle the battery.

3. Basic operations

Startup

Press the power on button for 3 seconds, Once

the screen goes light up,

You will see the “Startup”, it indicates

successful login.

● Shut Down

Press the power off button for 3 seconds, Once

the screen goes blank, the smart terminal is

fully shut down.

Screen interaction

Channel Switch

● Single Click: Lighten the screen/ enter a

menu or choose an option

● Long Press: Back to the previous menu

Double Click: When you are connecting the

WIFI and inputting password, double click to

input lowercase

Summary of content (7 pages)

PAGE 1
Connect the IP smart terminal and power adapter using the USB Data Cable. Red light on the IP smart terminal indicates battery charging in progress. Lights off indicates fully charged. WARNING: DO NOT USE THE ABOVE TWO CHARGING METHODS SIMULTANEOUSLY. Switch clockwise/counterclockwise: Switch/back to the next/ previous menu item ● WiFi Connection Go to the Settings > WiFi interface.
PAGE 2
⼀.Installation of SIM card Overview of E550 ● Note Before using the product, please read the Quick Guide to fully beneﬁt from it. Warranty period is 1 year from date of purchase. This product involves constant upgrading and/or improvement, our company reserves the right to change the speciﬁcations of software and/or hardware mentioned in this operating guide without any prior notice. The product speciﬁcations and information mentioned in the operating guide are for reference only.
PAGE 3
FCC Warning a、§ 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. b、§ 15.21 Changes or modification warning.
PAGE 4
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 5
 -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  -Consult the dealer or an experienced radio/TV technician for help. d、Specific Absorption Rate (SAR) information: This Smart Poc Radio meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
PAGE 6
also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at when properly worn on the body is 0.909W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.0cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.0cm separation distance between the user's body and the back of the handset.
PAGE 7
mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. .