TENA SmartCareTM/MC Gateway Manual www.tena.
REF INFORMATION SET-UP GATEWAY SN This guide is intended for Family Caregivers or Professionals using the TENA SmartCare Change Indicator™/MC in a home environment or a nursing home. The Change Indicator system tracks and displays urine saturation levels in an absorbent TENA incontinence product. IP65 The gateway should be within 10 m (33 ft) of 10 m (33 ft) the user and connected to an electric power 10 m (33 ft) outlet to use the TENA SmartCare Change FCC ID: Indicator System.
LIGHTS & BUTTONS & CLEANING REF LIGHTS & BUTTONS & CLEANING SN MD NOTE The LED light can be difficult to IP65 see if it is exposed to e.g. strong sunlight. Try to cover the sunlight to improve readability. FCC ID: IC: UDI: Gateway installation After attaching the gateway to a power outlet. Colour LED light What it means Blinking blue light: Wait. The system is connecting. 10 LED light 40 Button Steady green light: All is OK.
FCC ID: TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IC: 10 40 UDI: RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12”) to the Change Indicator. Otherwise, degradation of the performance of this equipment could result. Product weight (g/ ounce) Interference may occur in the vicinity of equipment marked with this symbol. Mounting bracket Type of communication BLE, LTE-M, 2 G Frequency BLE 2.
TROUBLESHOOT TROUBLESHOOT PROBLEM RESOLUTION What is “Dark mode”? The gateway LED light turns itself off after a few seconds = goes into dark mode in order to avoid disturbance during night. Press the button to wake up the gateway again. If nothing happens at a button-push, please make sure the gateway is connected to a power outlet. • There is something wrong with the connection to the TENA SmartCare Change Indicator system. There may be no battery in the transmitter or it is not properly inserted.
WARNINGS IMPORTANT INFORMATION • The gateway should not be sterilized. • The gateway should not be used in an oxygen rich environment. • The gateway should not be used in presence of flammable anaesthetics. • Do not attempt to repair the gateway by yourself. • Only use the power supply provided with the gateway. NOTE: • If the gateway connection cannot be established it will not be able to send information and work as expected.
WARNINGS This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: IMPORTANT INFORMATION This equipment complies with the ICES RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of the human body.
REF SN REF LABELLING SYMBOLS MD The followingREF symbols appear on your TENA SmartCare SN IP65 gateway or accessories and/or packaging: SN MD IP65 FCC ID: MD IP65 FCC ID: IC: IC: WEEE-marking. FCC ID: Dispose of electrical components in accordance with your local regulations.
Manufactured by: Essity Hygiene and Health AB SE-405 03 Göteborg, Sweden Visiting address: Mölndals Bro 2, Mölndal REF Distributed in the US by: Essity HMS North America Inc. Distributed in Canada by: Essity Canada Inc. SN Cira MD Centre, 2929 Arch Street, Suite 2600. Philadelphia, PA 19104 IP65 Made in Sweden www.essity.