Gimbal with Camera
Overview REMOVU K1 is a 4K Camera with an integrated 3-axis gimbal. It is lightweight, portable, user-friendly and affordable. To ensure that everything is in the shot, the K1 has a custom designed F2.8 wide angle lens. It shoots sharp 12MP photos and stable video at up to 4K. With the built-in 1.5” LCD screen, you can preview and playback recorded videos and photos instantly. The K1 uses a powerful interchangeable smart battery, that provides up-to 4 hours of continuous filming on a single charge.
In the Box K1 x 1 Pouch x 1 USB Cable x 1 Tilt Motor Roll Motor Pan Motor Pan Axis Lock Camera Status LED Speaker Built-in Microphone Power Switch Trigger Lanyard Hole Micro USB Port Battery Level Check Button 1/4” Threaded Insert
Prepare the Battery Fully charge the battery before using it for the first time. Charging Full charge - Charging Time: 150 minutes (using 5V/2A adaptor) - The LED indicator turns off when it is fully charged. Note : The micro USB port is for charging purpose only and does not support data transfer. Getting Started Unlock the Gimbal 1. Rotate the roll motor. 2. Slide the pan axis lock down. Powering On and Off Slide-down and hold the power switch to turn the device ON/OFF.
Connecting to the K1 App 1. Power on the K1. 2. Press the ‘Menu’ button on K1. 3. Select ‘Camera Settings’ on the menu. 4. Turn Wi-Fi on. 5. Turn on your mobile’s Wi-Fi and connect to the K1 Camera. (Default password: 12345678) 6. Launch the K1 mobile app and tap ‘Connect’. Controls 4-Way Joystick: Use the joystick to pan or tilt the camera. Shutter Button: Press once to take a photo. Record Button: Press once to start recording and press again to stop recording.
Specifications Camera ISP Ambarella A12S75 Lens F2.8 FOV 101°(D) Sensor Focus Max Image Size Still Photo Modes Video Modes Video Resolution Supported Memory Gimbal 1/2.
Safety Guidelines Before You Begin The following documents have been produced to help you safely operate and make full use of your K1. Check that you have all the included parts listed on “In the Box” first. Read the entire user manual and watch the tutorial videos on the product page of the official REMOVU website before you begin to use K1. If you have any questions or problems during the installation, maintenance or use of this product, please contact REMOVU or a REMOVU distributor. Caution 1.
Smart Battery Safety Guidelines Notice All instructions and other collateral documents are subject to change at the sole discretion of Essel-T CO., LTD (d.b.a REMOVU). For up-to-date product information, visit http://www.removu.com. Warning To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing your batteries. Battery Use 1. DO NOT allow the batteries to meet any kind of liquid.
3. Always keep the battery in a dry place. 4. DO NOT store the battery fully discharged for long periods of time, otherwise it will over discharge and lead to permanent damage. 5. DO NOT store in a box or drawer in which there are other metal materials or coins. It might cause a short circuit. 6. DO NOT store the battery with metal materials such as coins, keys, jewelry and hairpins. It might cause fire, if the battery’s slot is contacted with metal materials. Battery Maintenance 1.
www.removu.com Copyright 2017 Essel-T CO., LTD. All rights reserved. REMOVU® is a trademark of Essel-T CO., LTD. registered in the U.S. and other countries.