Specifications

ManualsBrandsESR ManualsElectronicsESR HaloLock Kickstand Wireless Charger

SPECIFICATION FOR APPROVAL

1.MECHANICAL DIMENSION (UNIT:mm)

2.SCHEMATICS:

1.The coil is attached to a

magnetic sheet，Disk size

43.5±1mm, thickness

0.80±0.05mm。

2.Wrap adhesive paper at the

outlet of the coil 1-2Ts;

3.The bottom of the spacer

should be glued

A B C

D2 E H I I

43.5±1.0 20±0.5 1.0±0.05 5±1 3±1.5 1.6MAX 05±0.05

3.WINDING：

1 底 1

STE

START-FINISH WIRE TYPE TURNS TAPE

REMAR

N1 S-F silk-covered wire⌀0.08*105mm 2UEW 10TS (Ref)

4.ELECTRICAL SPECIFICATION:

ITEM

L DCR L Q HI-POT

TES

CON

Coil and disk

S-F

A separate coil

100KHz,0.25V

AT 25℃

100KHz,0.25V

SPEC

6.5uH±10%

60mΩ Max

3.8uH±15%

5.BILF OF MATERIAL：

NO. ITEM MATERIAL SPECIFICATION MANUFACTURER

SGS NO.

silk-covered wire

0.08*105

Acetone covered wire

0.08*105 NANJINGJINNINGCO,LTD

Lead-free solder

article

Lead-free solder article

QIAODO

magnetic sheet

⌀

50*0.8

Manganese zinc hard magnetic

chip L slot

TAIYI CO.,LTD

glue

Xanthan gum 9999 LIANCHENG CO.,LTD

high-temperature

adhesive tape

7mm high-temperature adhesive tape

CUDAK CO.,LTD

application of gum

⌀49*0.1/3M CUDAK CO.,LTD

HRSW ELECTRONICS CO.,LTD

PART NO

Summary of content (3 pages)

PAGE 1
SPECIFICATION FOR APPROVAL 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: 1.The coil is attached to a magnetic sheet，Disk size 43.5±1mm, thickness 0.80±0.05mm。 2.Wrap adhesive paper at the outlet of the coil 1-2Ts; 3.The bottom of the spacer should be glued A B C D2 E H I 43.5±1.0 20±0.5 1.0±0.05 5±1 3±1.5 1.6MAX 05±0.05 3.WINDING： 1 底 I 1 STE P START-FINISH WIRE TYPE TURNS N1 S-F silk-covered wire⌀0.08*105mm 2UEW 10TS (Ref) TAPE REMAR K 4.
PAGE 2
HRSW ELECTRONICS CO.
PAGE 3
SPECIFICATION FOR APPROVAL 6.SAMPLE TEST DATA 6.1DIMENSION TEST(UNIT:mm) TEST A B C ITEM SPEC 50±1.0 20.5±0.5 1.0±0.05 1 50 20.54 0.97 2 49.98 20.53 0.98 3 50.02 20.56 1 4 49.89 20.58 1 5 49.96 20.54 1 6 7 8 9 10 MAX 50.02 20.58 1.00 MIN 49.89 20.53 0.97 AVERAGE 49.97 20.55 0.99 6.2ELECTRICAL TEST L DCR TEST S-F S-F ITEM TEST 100KHz/0.25v AT 25℃ COND 6.5uH 60mΩ SPEC (Max) ±10% 1 6.54 42.00 2 6.59 42.30 3 6.58 42.50 4 6.57 42.10 5 6.61 42.35 6 6.49 7 8 9 10 MAX 6.61 42.50 MIN 6.49 42.00 AVERAGE 6.56 42.