Û°·®·¬ ÌÓ ÍÓßÎÌ ÜÑÑÎ ÔÑÝÕ ËÍÛÎ ÓßÒËßÔ Ú±® ÛÍÞðîóÝÚ Þ´«»¬±±¬¸r Û²¿¾´»¼ ͳ¿®¬ ܱ±® Ô±½µ Thank you for choosing ESPIRIT door lock. If you experience problems or challenges with it, our customer services are always ready to help. Please send your requests by email to supported@espiritech.
PART 1 Installation Instructions CONTENTS Parts and Accessories 2 Additional Tools for Installation 2 Installation Instructions 1 3-12
Parts and Accessories Front Panel Rear Panel Screw Box Additional Tools for Installation (Not Included) 2
Installation Instructions 1 Check Dimensions 2 Check if the latch works well 3
Installation Instructions 3 Check the position of the front installation hole Pre-set drive-in latch is 60mm Adjust the latch to 70mm as below if needed Please make sure the spring bolt is retracted when adjusting the latch.
Installation Instructions 4 Check the size of side installation hole 5
Installation Instructions 5 Check the size of the front installation hole 6
Installation Instructions 6 Dismount the bigger adaptor ring and keep the smaller ring. Please retract the latch bolt before you install the front panel. Install the front panel meanwhile make sure the cylinder tailpiece vertically goes through the central hole of latch.
Installation Instructions 7 8
Installation Instructions Look from the door outside 8 Left side opening Note: ̸» »¨¬»®·±® µ»§°¿¼ · ·²¬¿´´»¼ ±² ¬¸» ´»º¬ ·¼» ±º ¬¸» ¼±±®ò 9 Right side opening Note: ̸» »¨¬»®·±® µ»§°¿¼ · ·²¬¿´´»¼ ±² ¬¸» ®·¹¸¬ ·¼» ±º ¬¸» ¼±±®ò
Installation Instructions 9 Insert the connecting wire to the cable on the interior lid 10 Install the thumbturn Please retract the latch bolt before you install the thumbturn as follows. Notice: After you install the thumbturn, test it to make sure it moves correctly.
Installation Instructions 11 Install the battery uprightly 11
Installation Instructions 11 Test the door lock after installation 1.Use the key or thumbturn to test the latch in proper installation. 2.One touch “C”, the locking bolt will automatically pull out and one short beep will be heard.
PART 2 User Guide CONTENTS GETTING TO KNOW YOUR LOCK 14 LOCK BODY 14 BEFORE USE 14 QUICK SETUP 15 CONFIGURE YOUR LOCK ON THE APP 13 16-23 HOME PAGE 16 SIDE MENU 16 PAIR YOUR LOCK 17 SEND EKEY 18 GENERATE PASSCODE 18-19 E-KEY MANAGEMENT 19 PASSCODES MANAGEMENT 19 FINGERPRINT MANAGEMNET 20 AUTHORIZED ADMIN MANAGEMENT 21 CHECK AND REFRESH LOCKING&UNLOCKING RECORDS 21 LOCK SETTINGS 22 CONFIGURE YOUR LOCK ON THE KEYPAD 22 LOCK AND UNLOCK 23 KEYPAD LOCKOUT 23 LOW BATTERY WAR
GETTING TO KNOW YOUR LOCK ESB02 SMART Door Lock is a Bluetooth® Enabled smart door lock that works with your smartphone. Paired with the buletooth gateway, you can control the door lock remotely anywhere anytime, also it works with the voice assistant of Amazon Alexa. LOCK BODY Ú·²¹»®°®·²¬ ®»¿¼»® ̱«½¸ Õ»§°¿¼ Ô±½µ·²¹ Þ«¬¬±² Ю±¹®¿³³·²¹ Þ«¬¬±² Ý»´´ Þ±¨ Ú±® ì¨ïòëÊ ÔÎê ßß ß´µ¿´·²» ¾¿¬¬»®·» Û³»®¹»²½§ Õ»§¸±´» ̸«³¾¬«®² Ú®±²¬ п²»´ λ¿® п²»´ BEFORE USE Initial Admin Passcode is 123456 1. 2. 3. 4.
QUICK SETUP Follow these steps to get your lock set up and ready to use the application. You can use the app to set up your lock step by step. 1 Download the app! Just search for “Espirit Lock” in the App Store or Google Play and register your account on the app. For properties renting management, you also can download and use app from App Store or Google Play.
CONFIGURE YOUR LOCK ON THE APP 1 HOME PAGE 2 SIDE MENU 16
CONFIGURE YOUR LOCK ON THE APP 3 PAIR YOUR LOCK When there isn’t a Bluetooth administrator on your lock (Initial or initialized status). You can input on the keypad to initialize your lock, then add a new Bluetooth administrator to the lock on the APP.
CONFIGURE YOUR LOCK ON THE APP 4 SEND EKEY is a virtual key that allows you to authorize someone who can access your lock, there’re different E-Keys for different needs. The E-Key recipient should be a registered user, you can send E-Key by following the hints on the APP. 5 GENERATE PASSCODE You can generate diffident passcode for different needs by following the hints on the APP.
CONFIGURE YOUR LOCK ON THE APP 6 E-KEY MANAGEMENT 7 PASSCODES MANAGEMENT 19
CONFIGURE YOUR LOCK ON THE APP 8 FINGERPRINT MANAGEMNET(For fingerprint version only) 20
CONFIGURE YOUR LOCK ON THE APP 9 AUTHORIZED ADMIN MANAGEMENT 10 CHECK AND REFRESH LOCKING&UNLOCKING RECORDS 21
CONFIGURE YOUR LOCK ON THE APP 11 LOCK SETTINGS CONFIGURE YOUR LOCK ON THE KEYPAD We recommend using the Espirit Lock app to program your lock. If you don’t want to app to operate the lock, you can use the manual programming instructions. passcodes and admin passcode must be 6~9 digits in length; If you make a mistake * All during programming, press E button twice to start over.
LOCK AND UNLOCK On the keypad LOCK On the APP On the keypad 2.With fingerprints UNLOCK On the APP KEYPAD LOCKOUT The keypad will be disabled for 5 minutes after 5 times consecutive wrong entries. During the lockout period, the light will flash quickly after each pressing.
www.espiritech.
