Wireless Magnetic Vehicle Charger Manual Model: Maghold C02 Note:For best performance and safety, please read this manual carefully before using the product.
1. Connect the Air Vent Clamp to the Devices; .Unscrew the nut .Place the nut around ball head,insert into socket .Tighten nut clockwise 2.Attach clamp to the car vent Press the button to unlock the air vent clamp; entry and release to grip the air vent 3.Connect power to the charger Use the USB-C to C cable packed in the box to connect the device and the car charger. Tips:When using this product, please make sure that the product is connected to the power.To achieve fast charging,QC2.0/3.
Note: Under normal charging conditions, the charger and mobile phone could be slightly hot; the temperature may rise if the mobile phone is working while charging (such as playing video). Please stop charging your phone when the charger is over-heating. Our product will automatically stop charging when over-heating. Please try it again when it’s cooling down 5.
Some components of this product are magnetic and metal materials may be adsorbed onto this product.Please donot use bank cards,credit cards or any other items with magnetic near the product so as to avoid losing the data stored due to demagnetization. Fits Below Supports(NotIncluded) Ball Diameter:16.8±0.3mm Specifications: Input:5V 2A, 9V 2A, 12V 2A Wireless Output:5W, 7.5W,10W,15W Cable Length: 1M USB C TO C CABLE Dimension:60*2.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.