eSky wireless Inc. ES825 User Manual V1.
Contents Version history .................................................................................................................................. 3 1. ES825 introduction ........................................................................................................................ 5 1.1 ES825 Appearance Introduction.......................................................................................... 5 1.2 ES825 Working Mode Introduction ...............................................
Version history Version Data Note V1.0 2018.11.12 First version V1.1 2018.12.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
1. ES825 introduction ES825 is a 2G (GPRS)/ 4G (Cat.M1&Cat.NB1) mini waterproof GPS tracker for pet (without voice feature). ES825 use BG96 module and support WIFI positioning, it uses magnet charging method. ES825 for non-portable use only. 1.1 ES825 Appearance Introduction 1. 2. 3. 4. 5. 6. 7.
Note: The meaning of each LED means, please check below. LED Color Red Resource Green GPS and GPRS(LTE) Charge OFF Fast flash (1s) Not in / charging / GPRS(LTE) OK GPS not fix Normal flash (3s) / Slow flash (6s) / Steady GPRS(LTE) lock GPS fixed GPRS(LTE) not lock GPS not fix GPRS(LTE) and GPS both OK not In charging 1.2 ES825 Working Mode Introduction *This chapter is under revise, please refer to your contact person.
1.2.3 1-hour SMS check mode This mode saves a lot of data traffic. After setting this mode, the device will wake up every one hour to check if has SMS command coming but no reporting, if Yes, it will deal with the SMS command, if not, after waiting some time, it will power off. 1.2.4 SMS standby mode This mode also saves data traffic, but it is more real-time. After setting this mode, the device will waiting SMS command at any time, but it will not open GPS, WIFI, TCP and so on, it only check SMS.
2. Test Preparation Make sure the equipment below are all available.
3. Quick Test Steps 3.1 Normal test Step 1: Insert SIM card (Please check in chapter 3.1.1) Step 2: Power on (Please check in chapter 3.1.2) Step 3: Red and green LED on? No (Please check in chapter 3.1.3) Yes Step 4: Green LED Blink slowly or on? (in the open air) (Please check in chapter 3.1.4) 1. Please re-do power on. 2.
3.1.1 Step1: Insert SIM Card First you should take off the rubber ring of ES825 and prepare the Nano SIM Card, like below: Note: This step must be done before power on the ES825. After inserted the SIM Card, you will hear” ka”, it means the SIM Card is inserted OK. 3.1.2 Step2: Power on Please press the SOS button, the device will be powered on.
3.1.3 Step3: Red and green LED on? After power on the ES825, Red and green LED will be on for 1 second, and then green LED will start blinking. 3.1.4 Step4: Green LED Blink slowly or on? (in the open air) Please go to the open air, and wait for some minutes, the Green LED blink slowly(if GPRS or LTE not lock) or on( if GPRS or LTE locked) if GPS fixed. 3.1.5 Step5: Set APN The command to re-set APN is “APN”. The format of “APN” is shown below.
So the content of SMS should be: apn,cmnet,,# APN If the SIM card not has username and password, just “,” is OK. 3.1.6 Step6: Green LED on? (in the open air) If the command responses” APN=Success! ”, the green LED will be ON if GPRS or LTE lock. 3.1.7 Step7: Check the reason If Green LED not on, it will has below possibility. 1) APN=Fail! Make sure no parameters are missed. Make sure the user name and password of SIM Card. 2) No Response. Make sure APN/apn spelling correct.
3.2 APP test Step 1: Download and install APP (Please check in chapter 3.2.1) Step 2: Register and login (Please check in chapter 3.2.2) Step 3: Register device OK (Please check in chapter 3.2.3) Yes Step 5: Normal function test (Please check in chapter 3.2.5) (Please check in Lchapter 3.5) No Step 4: Check the reason (Please check in chapter 3.2.
3.2.1 Step1: Download and install APP Please search the key words “etracking” in the app store, and choose the one like below shows, download and install.
3.2.2 Step2: Register and login After install the APP, open the APP. Please click “Register” if you need register first, and follow the steps as below: Please input your e-mail account on the first white blank Please click the first blue blank and you will receive 4 numbers from your email. Please input the 4 numbers into second white blank Please set a password on the third white blank, then click the second blue blank.
3.2.3 Step3: Binding device device After login, you will see the screen as below: if you want the turn into existing account, please click “ Switch account ” If you do not turn into other account, please continue to bind devices.
You can bind the device by scanning 2 QR code of the device or entering the IMEI of the device . Please click the “ RichScan” or “ Manual input” to bind devices. Then you can see the screen as below: Click “next” and press the SOS button of ES825, and you will enter management interface of the APP. Note: The first account binding the devices is the administrator. Other account need to be permitted by administrator if it want to bind the same device.
3.2.4 Step4: Check the reason If register fail, Device off line noted, please check if the battery has run out of power, you can let the device in charge for a while and then try again. Make sure GPRS/LTE signal coverage is good. If noted “the bind request has been sent to the administrator”, that means the device has been bind, if you make sure it is your first bind, please contact us.