Suzhou eSkywireless Inc. ES102 user manual ES102 user manual Suzhou eSkywireless Inc. 0 http://www.eskywireless.
Suzhou eSkywireless Inc. ES102 user manual Information to User This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Suzhou eSkywireless Inc. ES102 user manual 1 PREPARE before INSATLLATION 1.1 Product Display (image of ES102) (wire harness of ES102) 1.2 Packaging Inspection 2 http://www.eskywireless.
Suzhou eSkywireless Inc. ES102 user manual Open the box, check the terminal model is correct and the accessories are complete. Otherwise, please contact your dealer. 1.3 Install SIM Card 1.3.1 Selection of SIM Card The ES102 is a GPS/GPRS terminal, and it needs a GSM/GPRS SIM card. please reference dealer’s opinion to select carrier. 1.3.2 Installation SIM card Open the terminal cover, and put the metal side of SIM card face down and then fasten the card slot cover. 1.
Suzhou eSkywireless Inc. ES102 user manual 1)select the comm port of PC through which ES102 is connected with PC, as the follows 2) In Port Settings, change communication speed (bits per second) to 115200bps, 3)Final step is the certain AT settings necessary after 1st running of downloaded program. 3.1) Start connection first 3.2) Restart ES102 3.3) After you see the "IIII"as the following picture, start setting. 4 http://www.eskywireless.
Suzhou eSkywireless Inc. 5 ES102 user manual http://www.eskywireless.
Suzhou eSkywireless Inc. ES102 user manual 3 INSTALL and OPERATION 3.1 Installation Method The terminal is GPS positioning products, it is recommended that you follow the instructions to install. Note: 1) The following installation order, please do not inverted. 2) During the installation process, please do not supply the terminal. The terminal installation is divided into hidden installation and open installation. When the terminal is using special vehicles, hidden installation is recommended.
Suzhou eSkywireless Inc. ES102 user manual ① Battery connector ② Power connector, connecting terminal with the power connector of wire harness, as picture above. ③ I/O connector, connecting terminal with the I/O connector of wire harness, as picture above. ④ I/O lines ⑤ Power lines, it can connect with cigarette lighter or OBD, as picture above. 3.1.1 Open Installation The power connecting line we selected is provided by original cigarette lighter cord. 3.1.
Suzhou eSkywireless Inc. ES102 user manual 3.3 Installation Notes ① Avoid put together with the emission source, for example, reversing radar, anti-theft devices and other on-board communications equipment. ② As for fixing the terminal, you can bound with ties or stick with wide sponge strength double-faced adhesive. ③ The terminal has GSM antenna and GPS antenna,so the installation should ensure that the ES102face up (that is GPS toward the sky).