INSTALLATION MANUAL Version 1.
TABLE OF CONTENTS
1. PixMob Broadcaster p. 4 2. Materials needed p. 6 3. Installation p. 8 4. Broadcaster menu p. 10 5. Troubleshooting p. 14 6. Broadcaster characteristics p.
1. PixMob Broadcaster 2 3 1 4 5 6 A Broadcaster is a Bluetooth trans- 1. Color indicator mitter that controls PixMob luminous 2. Control buttons objects wirelessly. Similarly to a LED 3. Outgoing RF indicator light flood light it is controllable by a lighting 4. DMX signal indicator light board through DMX. 5. Ethernet indicator light 6.
11 6 7 8 9 10 6. DMX XLR5 IN 7. DMX XLR5 OUT 8. Ethernet (not activated) 9. Powercon IN (110V - 220V AC) 10. Powercon OUT (110V - 220V AC) 11.
2. Material needed 1 2 With light console 1. PixMob Broadcaster 2. Antenna 3. DMX XLR5 cable 4.
3 4 Connecting the Broadcaster 1. Plug DMX IN (female) at Broadcaster. 2. Plug DMX OUT (male) at console. 3. Install fixture in console (pc). CONSOLE DMX BROADCASTER Examples for connecting the Broadcaster.
3. Installation Installing the Broadcaster This picture shows the different connections of the Broadcaster. Broadcasters can also be connected in daisy-chain by connecting DMX OUT to DMX IN of the next Broadcaster and AC OUT to AC IN of the next Broadcaster.