User's Manual

Outdoor Table Portable Solar Energy Powered WWW.ESHINER.COM（2019）
The fuse must be removed when table
is not used for more than 5 days.
Please confirm the positive and negative poles of external energy storage
device before connecting . It is strictly forbid to reverse the positive and
negative poles, or short circuit!
User’s Manual
(YH-300-1B)
& Specifications
Model NO.
YH-300A-1B
Size (LxWxH-mm)
720×550×550（Height Adjustable）
PV Power
55 W
Battery Capacity
192 WH
Blue Tooth

Speakers
10W
Radio

Car cigarette lighter
12V 8A
USB
5V1A,5V2.1A×1
DC
12V 5A×2
USB-PD（45W）

QC3.0（18W）

PV Output Port
18V
QI Wireless Charger

Wireless Table Lamp

Built-in light

150W Inverter
Optional
Car Charger

adapter

Tactical Backpack
Optional
& Schematic of each part
& Button use
Starting up, the screen lights up and goes into standby
if no operation with 5 minutes. The operation button
activates related functions.
button: for switching between functions. If
No selection after 15s,it returns to initial page.
button: for functions on and off.
button: switching function（Left）.
button: Switching function（Right）.
For switching and searching of songs and channels.
button: Increment.
button: decrement.
For volume adjustment.
& Product accessories
USB cable×1 PV output cable ×1 Car charger×1
Wireless Table Lamp×1
& Use
1.When use this product at the first time, please insert the fuse into
fuse holder
：
①.After inserting the fuse, the internal power system starts to operate.
②.All charging ports can be charged by external devices.
③.Meantime, the table under the sun will generate electricity to charge
built-in lithium battery.
2.When the system switch is on, the bluetooth, radio, audio, and LED enter
into use. Please refer to function manual for details（Remark：bluetooth
name
：ESHINER）.
3.There are 3 ways to charge built-in lithium battery:
①.Household electricity 220/110V adapter for charging.
②.Car power 12V car charger cable for charging.
③. Tabletop PV panel 18V solar energy for charging.
4.When lithium battery charged by PV panel in outdoor
：
①.Try to let sunshine on the table as fully as possible.
②.When need to increase power generation efficiency, let sunshine irradiate
vertically on the table as much as possible:
Diagram of adjusting irradiation angle
5.When the PV output is charging an external energy storage box (storage device)
：
①.Set the switch to "Ⅱ" to start output. PV output cable Connect output
port with external energy storage device
②.Set the switch to "
I " to finish output, Charge the internal system.
③.Output voltage is 18V.
④.external energy storage box (storage device) should be
equipped with a protective device.
6.How to use the wireless charging panel
：
①.Place the bottom middle position of the LED in the wireless charging panel, it
automatically lights up.
②.Place the phone with wireless charging function in the wireless charging panel, it
automatically charged.
7.How to expand and fold the table:
①.Spread the table legs outward from table, and straighten the supporting
bar, it will self-locking.
②.When adjusting the height, gently pull the rung of the table leg to make a
“click” sound, and the locating pin pops out from the hole and
self-locking.
③.When folding the table, press the locating pin. At the same time, close
the table leg to the lowest gear.
④.The legs are folded inward and hidden inside the table.
& Attention:
①.The table can bear as weight as max 30KG，uniform load.
②.When placing high temperature objects on the table (>70°), insulation
pad should be used.
③.Can not in the rain for a long time. Protect table from scratching and
violent collision
④.When temperature is below 0C°,system automatically cut off the
lithium battery charging system. Meantime, Lithium battery output is
normal.
⑤.When the table is not use, please remove the fuse. It should be charged
at least one time per quarter in case the battery use out to damage.
⑥.Forbid to hit tabletop continuous and high-frequency to prevent damage
to the desktop and internal electronic devices.
⑦.Forbid to unauthorized disassemble or modify the parts from the table.
Avoid injury and dangerous.
⑧.Children should be used under adult guidance.
⑨.Forbid to short-circuit each output port. Please remove the fuse in case
of emergency!
⑩.The signs（ ）in the manual are warning signs.
& After-sales service and warranty:
1.The warranty card must be filled clearly and completely when product is sold.
Please read warranty card carefully and save it. The warranty time of this
product: table is 2 years, lithium battery is 1 year.
2. Warranty instruction: It is free during warranty period. After warranty period,
if need to fix or exchange the lithium battery, contact dealer or our company
to fix it, but we will charge you basic maintenance fee.
Warranty
Within one year from the date of purchase: __ __ __
distributor
Company name：
Address：
Tel：
3.Free warranty rules:
①. Free warranty if use product properly and something is wrong during
warranty period.
②.Once non-human factor accident occur during free warranty period, please
contact the dealer or the company's after-sales department, mail the product
and warranty card to them.
③.Free gift has not warranty, the warranty of the lithium battery is 1 year.
④.Customer is responsible for full cost of the repair, if the following conditions
occur during warranty period:
& Damage caused by actions which does not follow the instruction,
unauthorized disassemble or modification.
& Artificial damage including there is no purchase date and no dealer’s
ecord in the warranty card.
& Damage caused by irresistible natural disasters such as floods, fires,
earthquakes, lightning strokes, and wars.
& Other circumstances not covered by the warranty, except home use (for
long-term rental or long-term use on ships).
Warning
The AC adapter or car charger must be plugged into the DC
plug to charge the table. Do not plug in the PV output port ! ! !
Improper use can damage the product and even
cause injury. Please read this manual carefully
and use it correctly. Save the manual.
PV output port output is DC
18v,input is forbidden.