FAQ

12346 Valley Blvd, Suite A El Monte California U.S.A. 91732
Office: 626-579-3889 www.eleding.com Email: [e-mail] Page 1 of 3
eSenlite EEBPTL Series Panel Light Q&A
Q1: What kind of control and driver does the eSenlite LED panel light need? Does it need a Wi-Fi connection
or an app?
Answer: The distinctive eSenlite LED panel light can be fully functionally operated using a wireless 2.4GHz
handheld remote and/or a wall-mounted controller, eliminating the necessity for app control or Wi-Fi
connection.
Q2: How do you adjust the brightness and color temperature of the eSenlite LED panel light? Are there
dimmer switches or color temperature select switches located on the back of the light?
Answer: Unlike most panel lights, the eSenlite LED panel light well-built easy adjustment of both brightness
(10% to 100%) and color temperature (ranging from 3000 to 5000K) through the remote control. This
eliminates the need for labor-intensive tasks such as installing-pre-wiring for each unit to a standard 0-10VDC
dimmer switches or pre-configuring settings. Following installation, if you find the color temperature
unsatisfactory, there's no need to call an electrician to jump on the ladder again manually adjust the color
temperature settings one by one at the back of the light, as well, you can select your color temp anytime you
want.
Q3: Why would I want to dim and CCT the light? What are the advantages of using the eSenlite LED panel
light?
Answer: Picture this scenario: You're in a conference room or classroom, sharing videos or a PowerPoint
presentation, and you need to adjust the brightness. Or, after working hours, most buildings or offices need to
keep the lights with illuminating level on for security/safety reasons, while also aiming to save on your
electricity bill. In such situations, you can effortlessly fine-tune the brightness using either the remote control
or the wall-mounted controller. With a simple press of a button on the remote control, you can easily
customize the lighting to suit your preferences or even mimic the natural sunlight or warm temp you
experienced during the nighttime. This makes it a cost-effective and convenient solution, similar to changing
TV channels.
Q4: Is pre-wiring necessary for the panel light? How do I connect an eSenlite LED panel light with a 0-10 Volt
dimmer?
Answer: Traditionally, electricians need to pre-wire conventional panel lights with switches or link 0-10V
dimmer switches to adhere to energy-saving regulations set by standard or smart control system. This process
can consume a substantial amount of time, requires separate purchases of 0-10 Volt dimmer switches for each
room/section/area, and each panel requires a separate wiring connection with looping to the dimmer.
However, by opting for eSenlite panel lights, you can significantly reduce labor and material expenses,
especially for existing upgrade/replacement lighting projects. Pre-wiring is not required, and there's no need
for separate 0-10 Volt dimmers. eSenlite LED panel lights come with built-in dimming functionality designed for
energy efficiency and user friendly with much flexibility. eSenlite LED panel lights offer a competitive
alternative to standard 0-10 Volt dimmers. If the need arises to incorporate an additional 0-10 Volt dimmer, it