User's Manual

How to use:
Step 1: Insert the controller's receiver into the Player 1 slot
Note:
- Switch off the console before inserting the controller's receiver. Once the
receiver is inserted you may turn on your console.
Step 2: Once your console has been turned on, turn on your controller. The
receiver plugged into your console will begin to blink. Once the controller and
receiver have connected to each other, the receiver's LED will remain on. The
controller is now ready to use.
Note:
1.When using more than one wireless controller, you can only plug one receiver
in at a time. When the LED lights up on the first receiver you can then plug
in the second wireless receiver into the next available controller port.
2.If the controller has been turned off and on or the receiver has been
unplugged from the console again, you need to turn off and on the controller
to reconnect the controller to the receiver.
Thank you for purchasing Hip Gear's 2.4GHz Wireless Controller for XBOX
TM
consoles. Please read this manual carefully before use.
Features:
- Fully compatible with XBOX
TM
consoles
- Dual vibration motors
- Power and vibration selection
- Twin analog sticks
- Rubber grips
- Auto player matching
- Up to 15 Meters (50 ft) 2.4GHz RF wireless transmitting & receiving distance
- Turbo fire setting
- Macro programmable setting
- Low power Indicator
Button Name for Hip Gear's 2.4GHz RF XBOX
TM
Wireless Controller:
a) Controller (front view)
b) Controller (top view)
c) Controller's receiver
Battery Replacement:
- Open the battery compartment door.
- Insert the batteries as marked on the bottom of the battery compartment.
- Close the battery compartment door. You are now ready to use your wireless
controller.
Note:
- For longer playing time, use Alkaline batteries.
- Do not mix fresh and used batteries. This will reduce the controller's
transmitting and receiving distance and may cause the product to malfunction.
- Rechargeable batteries can be used with this product (rechargeable batteries
are not included).
- Dispose of used batteries according to the battery manufacturer's instructions.
Sleep Mode:
The controller will automatically shut down (sleep mode) if it is not in use for
more than 2 minutes.You can turn it on again by pressing start button.
Turbo Fire Setting:
Each button of the wireless controller has a built-in Turbo Fire function, simply
follow the steps listed below to achieve a Turbo Fire gaming experience:
- Press and hold the Turbo Fire button.
- Press any button once on the controller and the LED will blink. The Turbo
setting is complete.
- The Turbo LED will blink when you press the button which has been set to
Turbo Fire.
- Repeat the procedure to assign more than one button at a time to a Turbo
Fire function.
To Clear a Turbo Fire:
- Press and hold the Turbo Fire button.
- Press the button which has been set to Turbo Fire once.
- The Turbo Fire is clear, repeat this procedure for any other Turbo Fire cancellations.
Macro Setting:
The L-Trigger R-Trigger LT and RT buttons have built in Macro capabilities.
This Macro function allows you to program complicated moves and button
combinations into any of the Macro function buttons (L-Trigger R-Trigger, LT
and RT).
Note:
The regular function of the Black, White, LT and RT buttons and Turbo Fire
Settings are suspended when the button has a Macro function designated to it
- the LT and RT buttons are activated by pressing down on the analog sticks.
Only when the Macro designated button is cleared will the button resume its
regular operation. Clearing the Macro function is explained further in this manual.
How to Program a Macro Function:
- Press Macro button, the Macro LED turns ON.
- Press the Macro function button you wish to use (L-Trigger R-Trigger, LT or
RT); the LED will blink.
- Input the button combination you wish to designate to the Macro button you
have selected. Each combination must be completed within 10 seconds
and a maximum of 15 button presses are allowed for each Macro function
designation.
- Press the Macro button again when the input has been completed, the LED
is now OFF.
- The Macro LED will blink when the Macro function button is activated.
- Repeat the same procedure to program other Macro function buttons.
To Clear a Macro Setting:
- Press the Macro button, the Macro LED is now ON.
- Press the designated Macro function button that you wish to clear (L-Trigger
R-Trigger, LT or RT); the LED will blink.
- Press the Macro button again, the Macro setting is now clear, and the LED
is OFF.
Low Power Indication:
The Turbo LED and Macro LED will blink simultaneously when the power is
low, replace with new batteries.
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. There is no guarantee that some form of
interference will not occur in a particular installation.If this equipment
does cause interference to radio or television reception, the user is encouraged
to try one or more of the following corrective measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that which the
receiver is connected to;
Consult an experienced radio / TV technician for assistance.
LT
B
A
C
K
S
T
A
R
T
W
h
i
t
e
B
a
c
k
M
A
C
R
O
T
U
R
B
O
LT
B
A
C
K
S
T
A
R
T
W
h
i
t
e
B
a
c
k
M
A
C
R
O
T
U
R
B
O
LED light-up
LT
B
A
C
K
S
T
A
R
T
W
h
i
t
e
B
a
c
k
M
A
C
R
O
T
U
R
B
O
LT
B
A
C
K
S
T
A
R
T
W
h
i
t
e
B
a
c
k
M
A
C
R
O
RT
LT
B
A
C
K
S
T
A
R
T
W
h
i
t
e
B
l
a
c
k
M
A
C
R
O
T
U
R
B
O
LED light-up
L-Trigger R-Trigger
Y
X
A
B
Black
White
LT
Back
Start
D-PAD RT
Macro Turbo
LED
OFF/ON/
XBOX
TM
2.4GHz Wireless Controller
compatible with X-Box
TM
FCC NOTE:

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO 
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED 
MODIFICATIONS TO THIS EQUIPMENT. SUCH 
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO 
OPERATE THE EQUIPMENT.