User's Manual

How to use:
Step 1: Turn off your console and insert the controller’s receiver into the Player
1 slot
Note:
- Do not insert the controller’s receiver into a memory card slot.
- Make sure to switch off the console before inserting the controller’s receiver.
Once the receiver is inserted you may turn on your console.
Step 2: When the receiver is first plugged into the console, the LED is OFF.
Once the controller has detected the receiver, the LED on the receiver
will turn ON. The controller is now ready to use. Please note that the
controller MAY take up to 3 minutes to connect to the receiver.
Note:
When using more than one wireless controller, plug one receiver in at a time.
When the LED lights up on the first receiver you can then plug in the second
wireless receiver into the next available controller port.
Force Connection to a designated Controller and Receiver:
Forcing the connection to a designated controller and receiver can be achieved
by following the steps listed below:
a)Press the “FC” button on the receiver - the LED on the receiver starts to blink.
c) Controller's receiver
Battery Replacement:
- Open the battery compartment door.
- Insert the batteries as marked on the bottom of the battery compartment.
Make sure that the polarity matches the illustration on the battery compartment.
- Close the battery compartment door. You are now ready to use your wireless
controller.
Note:
- For increased playing time, use Alkaline batteries.
- Do not mix fresh and used batteries. This will reduce the controller’s
transmitting and receiving distance and may cause the product to malfunction.
- Rechargeable NiMH or NiCad batteries can safely be used with this product
(rechargeable batteries are not included).
Dispose of used batteries according to the battery manufacturer’s instructions.
Thank you for purchasing Hip Gear 2.4GHz Wireless Controller for GameCube.
Please read this manual carefully before use.
Features:
- Fully compatible with GameCube
- Dual rumble motors
- Power on/off switch
- Rumble on/off switch
- 6 Digital Action Buttons and 2 Analog Triggers
- Rubberized grips
- Auto channel selection
- 50’ (15 meter) range
- Turbo fire setting
- Macro setting
- Low power Indicator
Button Name for Hip Gear’s 2.4GHz GameCube Wireless Controller:
a) Controller (front view)
b) Controller (top view)
GameCube 2.4GHz Wireless Controller
Instruction Manual
Y
X
A
B
Turbo
Start,Pause
Macro
C StickD Pad
Directional Stick
M
a
c
r
o
T
U
R
B
O
ON
S
T
A
R
T
OFF
Vibration
Power ON
Power OFF
Left Analog Trigger
Z
Right Analog Trigger
LED
FORCE CONNECTION
BUTTON