User's Manual
RADAR
•
LASER
•
SAFETY
•
DETECTO
Cordless Long Range
Radar Laser Detector
Cordless Convenience
Long Range Radar/Laser Detection
OLED Display
OLED
Long Range Protection + Cordless Convenience
Contact Us
Registration
Register now to enter your new SOLO S4
for our product warranty and qualify for
special oers at EscortRadar.com
SOLO S4 Info & Accessories
800.433.3487
EscortRadar.com
ESCORT Inc.
5440 West Chester Road
West Chester OH 45069
Sales/Service 800.433.3487
www.EscortRadar.com
©2017 ESCORT Inc. ESCORT®, PASSPORT®, SOLO®, AFR®,
SmartShield®, AutoSensitivity™, MuteDisplay™, and
ExpertMeter™ are trademarks of ESCORT Inc. SWS is a
trademark of SWS, L.C.
Features, specications and prices subject to change
without notice.
Designed in the USA by Escort, Inc., manufactured in the
Philippines.
FCC NOTE: Modications not expressly approved by the
manufacturer could void the user’s FCC granted
authority to operate the equipment.
FCC ID: QKLS4
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received including
interference that may cause undesired operation.
6 8
Settings & Preferences
Press the RVW button to go Press the CHG button to change
from one category to the next your setting within a category
Pilot Light Pilot HWY * Full word: Highway or Auto or City
(Options using Pilot H Letter: H or A or C
12-volt SmartCord) Pilot H.> Letter, with scanning dot
Pilot + Symbol: + or
•
or –
Pilot +.> Symbol, with scanning dot
Pilot +> Scanning symbol
Auto Power aPwr Motn * Uses motion to turn SOLO S4 o
aPwr Time Uses time to turn SOLO S4 o
aPwr Off Turn SOLO S4 on and o manually
Power-On Sequence
PwrOn STD * Standard power-on sequence
PwrOn FST Fast power-on sequence
Signal Strength Meter
Meter STD * Standard signal strength meter
Meter EXP Expert Meter
AutoMute
aMute ON * AutoMute on
aMute OFF AutoMute o
AudioTones
Tone STD * Standard tones
Tone LOUD Loud tones
City Mode Sensitivity
City STD * Standard City mode sensitivity
City LoX Low X-band sensitivity in City Mode
City NoX No X-band sensitivity in City Mode
Brightness
Brt AUTO * Brightness is controlled automatically
Brt MIN Minimum brightness when turned on
Brt MED Medium brightness when turned on
Brt MAX Maximum brightness when turned on
Brt DARK Full Dark Mode when turned on
Bands
Bands DFT * Def ault bands selected
Bands MOD One or more bands are disabled
Turn bands “ON” or “OFF” by
pressing the Mute button
X ON or OFF * X-band detection on
K ON or OFF * K-band detection on
Ka ON or OFF * Ka-band detection on
LSR ON or OFF * Laser detection on
SWS ON or OFF * SWS detection o
VG2 ON or OFF * VG2 detection o
EZ-Programming
How to use EZ-Programming
1 To enter Program Mode, press and hold
both PGM buttons for 2 seconds. The unit
will beep twice, and will display the word
Program.
2 Then press either RVW button to review
the current settings. You can either tap the
button to change from item to item, or press
and hold the button to scroll through the
items.
3 Press the CHG button to change any
setting. You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options.
4 To leave the Program Mode, simply wait 8
seconds without pressing any button. The
unit will display Complete, beep 4 times,
and return to normal operation.
To quickly reset SOLO S4 to the factory
program settings, press and hold the Mute
and SEN buttons while turning SOLO S4 on.
Example of EZ-Programming
Here is how you would turn SOLO S4’s
AutoMute feature o.
1 Enter the Program Mode by holding one
of the VOL buttons and SEN button down
for 2 seconds. SOLO S4 will beep twice and
display Program.
2 Then hold the RVW button down. SOLO S4
will scroll through the categories, starting
with Pilot options, Auto-Power, Power-On
sequence, Signal Strength Meter, AutoMute,
Tones, City sensitivity, Brightness, and Bands.
3 Release the RVW button when SOLO S4
shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
SOLO S4 will display aMuteON. (If you
accidentally go to the next category, press
the opposite “VOL” button to go back.)
4 Press the CHG button to change from
aMuteON to aMuteOFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any
button. SOLO S4 will display Complete,
beep 4 times, and return to normal
operation.
*Default Setting
7
Open ➜
Notes for Settings & Preferences
For descriptions and details of features and
functions visit EscortRadar.com to view and
download the complete SOLO S4 Owner’s
Manual.
Restoring the Factory Default Settings:
To reset SOLO S4 to its original factory
settings, press and hold the Mute and M
(Mode) buttons while turning SOLO S4 on.
SOLO S4’s display will provide a Reset
message, accompanied by an audible alert,
acknowledging the reset.
Service Procedure
If your SOLO S4 ever needs service, call us at
1-800-543-1608. We may be able to solve
your problem over the phone. If the problem
requires that you send your SOLO S4 to the
factory for repair, we will provide you with a
Service Order Number, which must be
included on the outside of your shipping box.
Enclose the following information with your
SOLO S4 and power cord:
• Your Service Order Number
• Your name and return address
• Your daytime telephone number
• A description of the problem you
are experiencing
Quick Reference