User's Manual

ManualsBrandsEscort ManualsElectronicsFront Radar Receiver

360°

Alerts

The World’s Most Advanced Detection System

The most powerful & complete

protection available

MAX Ci 360

Dual Antenna Front

and Rear Protection

True Stealth Operation Lets

You Drive 100% Undetected

360° Directional

Alert Arrows

ESCORT Live App Provides

Crowd Sourced Alerts

GPS Intelligence

Rejects False Alerts

Laser Shifters Provide

Speed of Light Protection

Installation Manual

Designed in the USA

ESCORT Inc.

5440 West Chester Road

West Chester OH 45069

800.433.3487

EscortRadar.com

, ESCORT MAX Ci 360

, Laser ShifterMax

, TrueLock

, AutoSensitivity

SpecDisplay

, TotalShield

, ExpertMeter

, ESCORT Live

, IVT Filter

and EZ Mag Mount

are trademarks of ESCORT, Inc.

FCC NOTE:

Modications not expressly approved by the manufacturer could void the user’s FCC granted authority to operate the equipment.

FCCID: QKLM7R, FCCID: QKLM3R2, CONTAINS FCCID: QKLBT2

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received including interference that may cause undesired operation.

Summary of content (7 pages)

PAGE 1
The World’s Most Advanced Detection System 360° Alerts MAX Ci 360 Designed in the USA ESCORT Inc. 5440 West Chester Road West Chester OH 45069 800.433.3487 EscortRadar.com The most powerful & complete protection available Dual Antenna Front and Rear Protection True Stealth Operation Lets You Drive 100% Undetected 360° Directional Alert Arrows ESCORT Live App Provides Crowd Sourced Alerts Laser Shifters Provide Speed of Light Protection GPS Intelligence Rejects False Alerts ©2016 ESCORT, Inc.
PAGE 2
ESCORT MAX Ci Components Front Radar Receiver • Weatherproof radar receiver • Two universal mounting brackets with stainless steel hardware • Built-in 3-foot cable with waterproof connector • 13-foot cable with waterproof connector and inline grommet • 12 nylon wire ties to secure cable Rear Laser ShifterMax Sensors* (optional) • Twin weatherproof sensors • 6-foot cables with waterproof connectors In-dash Display Bezels Radio Mute Cable • For a factory-installed look, use either the black or platinum in
PAGE 3
Important Notes For the easiest, trouble-free installation, install the interface first and wire it to a 12-volt switched circuit. Then, before installing the other components, plug all of them into the interface and power up the unit to confirm proper operation.  Installation Tips Installation Warnings E Read This First Please read these instructions in their entirety before starting your installation.
PAGE 4
A Interface B Front Radar Receiver White Stripe Front Radar Receiver (Continued) D Front Laser ShifterMax Sensors 5 Find a suitable entry point into the vehicle’s interior. Refer to the Installation Tips section. 6 1 1 Install the Interface under the dash using supplied zip-ties. Note: Do not mount Interface inside vehicle’s engine compartment! 2 Connect black wire (-) to ground, and red-striped wire (+) to a switched 12-volt supply.
PAGE 5
Installation Schematic Overview Letter References For Components (Color Coded Connections To Interface) D A Interface B Front Radar Receiver (White Stripe) B I F G E H C Front ShifterMax Sensors (plug into ports 1 & 2 on ShifterMax Bridge Box) D ShifterMax Bridge Box (plugs into Interface using supplied cable with no stripe or shrink) E F G H I GPS Antenna (Yellow Shrink) Display Module (Orange Shrink) Control Module (Blue Shrink) Concealed Alert Indicator (Gray Shrink) Rear Radar Receiver (
PAGE 6
Front Laser ShifterMax Sensors (Continued) E F Display Module Orange Shrink GPS Antenna Yellow Shrink Display Bezel Mounting 1 Snap mounting bracket onto sensor and install the included bolts but do not tighten them. If the bolts do not thread into the sensor then you have the bracket on backwards. 2 Apply the double sided tape to the underside of the sensor’s mounting bracket. Check front alignment and mount the sensor to a solid surface of the vehicle.
PAGE 7
G Control Module Blue Shrink 1 Determine the best location for the Control Module. If installed by a professional, the customer should be consulted. An optimal location is easily visible and accessible from the driver’s position, and does not interfere with normal driving. Avoid locations that require reaching through or around the steering wheel. 2 Clean the mounting surface thoroughly. 3 Mount the Control using the pre-applied adhesive.