Quick start guide
What's included Remote E1 device USB-C power supply Power cable HDMI cable USB-C to USB-A adapter Micro-USB cable
1 Remote Turn upside down Top Mouse mode indicator (blue LED) G Charging indicator (red LED) B B Power on/off Bottom C Turn mouse mode on/off Activate voice control (short press) E D C Switch apps Back (short press) Quit app (long press) Volume - Volume + F A B C D E F G Cameras Microphones USB-C ports HDMI port MicroSD slot Ethernet port(s) (if you have a router model it has two Ethernet ports) Activity Status Display
2 Connect the E1 device to your TV A Plug an HDMI cable into your TV B Plug the other end of the cable into the HDMI port on the bottom of the E1 device 3 Connect the power supply A Connect power supply cable to USB-C port B Connect power cable to power supply C Plug into wall outlet
* Connect via Ethernet (optional) * Use as a wireless access point (optional - router model only) LAN Router model If you have a router model, you may use it as a wireless access point to connect other Wi-Fi devices. Refer to the router setup guide for more information. A Plug an Ethernet cable into the E1 device B Plug the other end of the cable into your modem If you would rather connect via Wi-Fi, you may do so using the on-screen setup once the E1 device is connected to your TV.
4 Turn right side up 5 Placement Bottom Upon applying power, a rotating color pattern will start to display via the Activity Status Display. HDMI 1 TV aspect ratio or display settings may need to be adjusted.
Success Charging the remote Setup screen should appear on your TV. Press OK on the remote to begin. Follow the instructions on your screen. OK VOL OK If the remote is not responding, it may need to be charged.
Remote keyboard Charging a game controller (game controller not included) Example: Press and hold the shift button to use capital letters. Press the tab button to use Caps Lock while typing. To use numbers and symbols in blue, hold down the 123 button while typing.
Common questions Why does my TV screen say “no input”? Your TV may be set to the incorrect input or source. There’s a quick fix for this! Just press the “input” or “source” button on your TV remote until you select the HDMI connection that matches the port your HDMI cable is plugged into on your TV. Why is there a mouse cursor on my screen? If the remote moves a mouse cursor freely around the screen, it is in "mouse mode". Mouse mode is active if the blue LED on the remote is lit.
LZT 138 2195
Safety guide
Safety guide Before installation or use of the E1 device, carefully read all of the instructions in this safety guide for safe operation of the device. This safety guide contains important warnings and cautions regarding safety. Improper setup, care, and operation of the E1 device may lead to the risk of death, injury, or damage to the device or other property, including device accessories. After reading, keep this safety guide handy for future reference.
Installation & placement Verify the E1 device has not been dropped, altered, transported or shipped without proper packaging, or otherwise treated without care before installing the device. Do not install (or use) the E1 device on an unstable surface. The E1 device may fall, causing serious bodily injury and serious damage to the device. Do not place objects on the E1 device after installation.
Use by children & playing safe The E1 device should not be used by children without adult supervision. Make sure children play safely and within their limits. Parents should inspect the E1 device and any accessories for damage before allowing children to use the device. Parents should instruct children in the correct and safe use of the E1 device. WARNING: CHOKING HAZARD--Small Parts. The E1 device contains small parts that may be a choking hazard for children 12 and under.
Base unit Router unit Main processor AMD® Ryzen™ Embedded V1807B AMD® Zen™ 4 Cores / 8 Threads, 3.3 GHz (3.6GHz boost) AMD® Vega™ GPU 2.2 Teraflops graphics engine Main processor AMD® Ryzen™ Embedded V1807B AMD® Zen™ 4 Cores / 8 Threads, 3.3 GHz (3.6GHz boost) AMD® Vega™ GPU 2.2 Teraflops graphics engine Memory DDR4-3200 8 GB Memory DDR4-3200 8 GB Storage 512 GB NVMe SSD (>2 GB/s read speed, >1.5 GB/s write speed) Storage 512 GB NVMe SSD (>2 GB/s read speed, >1.
Regulatory Information Federal Communication Commission Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
LZT 138 2196
