B2CH113AA-A B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Document Date: Document Number: Document Version Number: Document Status: Feb 9, 2010 B2CH113AA-001 1 Release © Copyright 2010 by BelAir Networks. All rights reserved.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Contents About this Document ................................................................... 2 Introduction .................................................................................. 3 Conditions of Use ......................................................................... 4 Module Installation and Service ................................................. 5 Final Product Requirements ......................................................
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Introduction The B2CH113AA-A (hereafter referred to as “the module”) is a 5 GHz radio module compatible with the IEEE 802.11 standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on Orthogonal Frequency Division Multiplexing (OFDM) radio technology. The module contains a complete IEEE 802.11a/n radio and Medium Access Control (MAC) protocol engine which allows implementation of an IEEE 802.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Conditions of Use General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module B2CH113AA-A is only intended for use in BelAir Networks products and is not for sale to the general public as a stand-alone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Country of Use B2CH113AA-A is certified with limited modular approval for use as an Intentional Radiator in the United States as device: FCC ID: RAR30005001 and in Canada as IC: 4674A-30005001. Please read all regulatory statements at the end of this document before any attempt to install or operate this module. The module is only certified for operation in the United States and Canada.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Final Product Requirements The requirements below apply to any final product in which the B2CH113AA-A module is installed. Antenna Usage and Module Transmit Power The DRU 5GHz radio module supports MIMO 2x2 configuration with two transmit chains and two receive chains. The B2CH113AA-A module shall only be used at the following output power levels in conjunction with the following antenna types as outlined in the tables that follow.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Certified Antennas: The following antennas are certified for use: Manufacturer Part # Gain (dBi) Type BelAir BMAG00287‐A 7 OMNI BelAir BMDG30083‐A01 15 Directional In order to comply with the FCC and Industry Canada rules in the USA and Canada, respectively, it is required to respect the maximum transmit power limits as follows for each of the antenna types as indicated in the above tables.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Product Installation Products which contain B2CH113AA-A shall only be installed by professional installers trained by BelAir Networks or its authorized agents. This product is to be installed on fixed permanent structures. In addition to normal installation procedures and good installation practice, professional installers are responsible to ensure that: 1. Only an approved antenna (see above) is connected to the module, and, 2.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Regulatory Statements The following regulatory notes apply to the product which contains module B2CH113AA-A. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Manufacturer’s Industry Canada Conformity Statement This device has been designed to operate with an antenna having a maximum gain of 15 dBi.
B2CH113AA-A Product Manual DRU 5 GHz WLAN Radio Module RF Exposure Statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found to be compliant to the requirements set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF exposure from radio frequency devices. This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found to be compliant to the requirements set forth in CFR 47 90.1335 and Sections 2.1091, 2.
