B2CH114AA B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Document Date: Document Number: Document Version Number: Document Status: Nov 10, 2010 B2CH114AA 1 Release © Copyright 2010 by BelAir Networks. All rights reserved.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Contents About this Document ................................................................... 2 Introduction .................................................................................. 3 Conditions of Use ......................................................................... 4 Module Installation and Service ................................................. 5 Final Product Requirements ......................................................
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Introduction The B2CH114AA (hereafter referred to as “the module”) is a 2.4 GHz radio module compatible with the IEEE 802.11 standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on Orthogonal Frequency Division Multiplexing (OFDM) radio technology. The module contains a complete IEEE 802.11b/g/n radio and Medium Access Control (MAC) protocol engine which allows implementation of an IEEE 802.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Conditions of Use General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module B2CH114AA is only intended for use in BelAir Networks products and is not for sale to the general public as a stand-alone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Country of Use B2CH114AA is certified with limited modular approval for use as an Intentional Radiator in the United States as device: FCC ID: RAR30002002 and in Canada as IC: 4674A-30002002. Please read all regulatory statements at the end of this document before any attempt to install or operate this module. The module is only certified for operation in the United States and Canada.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Final Product Requirements The requirements below apply to any final product in which the B2CH114AA module is installed. Antenna Usage and Module Transmit Power The DRU 2.4GHz radio module supports MIMO 2x3 configuration with two transmit chains and three receive chains. The B2CH114AA module shall only be used at the following output power levels in conjunction with the following antenna types as outlined in the tables that follow. 2400-2483.
B2CH114AA Product Manual DRU 2.
B2CH114AA Product Manual DRU 2.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Certified Antennas: The following antennas are certified for use: In order to comply with the FCC and Industry Canada rules in the USA and Canada, respectively, it is required to respect the maximum transmit power limits as follows for each of the antenna types as indicated in the above tables. Warning: Use of this module in conjunction with any antenna not expressly listed above will void authority to install or operate this equipment.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Standard Antennas DRU 2.4GHz radio DRU 5GHz radio 5 dBi 7 dBi Minimum Safety Distances Meduim Gain Antennas DRU 2.4GHz radio DRU 5GHz radio ≤ 8dBi ≤ 15dBi High Gain Antennas (up to 22 dBi) DRU 2.4GHz radio DRU 5GHz radio > 8dBi > 15dBi Minimum Distance Minimum Distance Minimum Distance 8.1 inches 19.3 inches 42.9 inches Adherence to these rules by the professional installer is mandatory.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Regulatory Statements The following regulatory notes apply to the product which contains module B2CH114AA. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Manufacturer’s Industry Canada Conformity Statement This device has been designed to operate with an antenna having a maximum gain of 16 dBi.
B2CH114AA Product Manual DRU 2.4 GHz WLAN Radio Module RF Exposure Statement This device complies with FCC RF radiation exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the FCC radio frequency exposure limits. However, this device should still be installed and used in such a manner that the potential for human contact during normal operation is minimized. In order to comply with RF exposure limits established in the ANSI C95.
