BCG001912 BCG001912 Product Manual WCS 2.3 GHz WLAN Radio Module Document Date: Document Number : Document Version Number : Document Status: 26 June, 2009 PM-BCG001912 2 Release © Copyright 2009 by BelAir Networks. All rights reserved.
BCG001912 Product Manual Page 2 of 12
BCG001912 Product Manual Contents About this Document ............................................................................3 Introduction...........................................................................................4 Conditions of Use...................................................................................5 Module Installation and Service...........................................................7 Final Product Requirements......................................................
BCG001912 Product Manual Introduction The BCG001912 (hereafter referred to as “the module”) is a 2.3 GHz radio module compatible with the IEEE 802.11g standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on OFDM radio technology. The module contains a complete 802.11g radio and Medium Access Control (MAC) protocol engine which allows implementation of an 802.11g module. The module is not intended for stand-alone operation.
BCG001912 Product Manual Conditions of Use General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module BCG001912 is only intended for use in BelAir Networks products and is not for sale to the general public as a stand-alone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module.
BCG001912 Product Manual The module is only certified for operation in the United States. Before attempting to install and operate this module in any other country, contact BelAir Networks for approval. Module Labeling One or more labels are applied to the module during manufacture, including a label which identifies the FCC identification numbers. Do not attempt to remove any labels from the module.
BCG001912 Product Manual Module Installation and Service Installation into a Product The module shall only be installed by a technician trained by BelAir Networks or its authorized agents. It should only be installed into an approved product (see above) following all manufacturing and service procedures for that product. The module should only be installed into a final product in a manufacturing or service depot site. Caution: BCG001912 is an electro-static discharge (ESD) sensitive device.
BCG001912 Product Manual Final Product Requirements The requirements below apply to any final product in which the BCG001912 module is installed. Antenna Usage and Module Transmit Power BCG001912 module shall only be operated on the following frequencies in conjunction with the following antenna types as outlined in the tables that follow: 2.3 GHz – Part 27 For operation in the 2.3 GHz band, the BCG001912 may be set to operate on 2.
BCG001912 Product Manual 2.5 2.5 2.5 A2U B2L B2U 2353.75 2356.25 2358.75 15.0 15.5 15.5 Antenna List BMHG50002-A BelAir Networks, 8 dBi directional antenna MT-344026/N, MTi, 15.5 dBi directional antenna MFBW23008, Maxrad, 8 dBi omni-directional antenna BNCKG0071, BelAir Networks, 3 dBi omni-directional antenna Warning: Use of this module in conjunction with any antenna not expressly listed above will void authority to install or operate this equipment.
BCG001912 Product Manual Regulatory Statements The following regulatory notes apply to the product which contains module BCG001912. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product.
BCG001912 Product Manual • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
BCG001912 Product Manual RF Exposure Statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found to be compliant to the requirements set forth in CFR 47 27.52 addressing RF exposure from radio frequency devices. This device complies with FCC RF radiation exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the FCC radio frequency exposure limits.